Inductive Charging - Parkside PWCA 20-Li A1 Operating Instructions Manual

The indicator LED 7 goes out after a short time.
♦ If you are no longer using or charging your
device, disconnect it from the battery adapter 3.

Inductive charging

Press the ON/OFF switch 6 to activate the
♦
battery adapter 3. The indicator LED 7 lights
up.
♦ Place the smartphone on the induction charging
surface 2. The charging process begins auto-
matically.
♦ Press the On/Off switch a second time to turn
on the LED light 1.
NOTE
► If the charging process does not start, remove
the protective cover from the smartphone or lay
it with its back side on the induction charging
surface
PWCA 20-Li A1
.
GB │ IE │
15 ■