GEYA THC-811 Manual

811 top Conversational programmable timer
■(Generation)：
●811 top products introduce new design concepts, adopt the latest international hardware and software technologies, and operate in
a simple and understandable manner, allowing users to complete all Settings step by step according to the instructions in the display
screen.
●Large LCD display screen, can directly display year, month, day, week, time, 24 hours a day or a week ON/OFF arbitrary Settings,
LCD display part without external power supply.
●Simple four-button operation, in a conversational way to instruct the user to input the required Settings, without repeatedly reading
the complex program setting instructions, as long as the operation once, yo will be understand how to proficient.
●Manual ON/OFF is the output state (once effective) function, permanent ON/OFF (permanent effective) function, allowing users to
change the output ON/OFF state easily without changing the setting procedure when special and temporary needs to change the
output state.
●Up to 44 programs can be set within 24 hours or a week, and the minimum set time interval is 1 minute。
●Up to 44 pulse programs can be set within 24 hours or a week, with a minimum setting time interval is 1 second。
●Up to 18 cycles programs can be set in 24 hours or a week。
●811 top control contact is 1-way group 1 (1C).
●In the case of external power supply, the lithium battery stored in the timer can also maintain the timer use for about four years, its
contact state cannot change, but the control program is normally changeover.
●There are six national languages (English, Portuguese, Italian, Spanish, German, French), you can choose and change the
language。
■Main technical parameters：
●power：AC220V+10%～-15% 50/60Hz
AC110V±10% 50/60Hz
the other voltage specifications can be customized
●Power consumption: max 7.5VA
16A 20A 25A 30A
●Contact capacity： AC250V cos φ=1
●Control the way：811 top 1way
●Timing benchmark: high quality quartz shock timing
●Timing accuracy: at room temperature (20℃) time difference ±1 second per day
●Maximum setting procedure: 44
●Minimum setting time: 1 minute
●Display: LCD display
●Operation keys: four operation keys plus a reset key
●Storage power: at room temperature (20℃), lithium battery can supply power for about 4 years
●Ambient temperature-10℃～+50℃
●Storage environment temperature：-10℃～+50℃
The black stripe shows that the
contacts are ON 24 hours a day
AUTO means ON/OFF as programmed.
It says the time is six o 'clock ,
Wednesday, August 16, 2007。
ON means output ON
OFF means output OFF
Display daylight saving time function
Display winter time function
What day is it today
(Wednesday is the legend)
Means the timer USES its own power
source (no output conversion)
Indicates that the timer USES an
external power source
"Menu"button is the function key for
selection. Select "PROGRAM", "DAT/TIME"
and "MANUAL" successively. If you have
entered the function, press this key to leave or cancel
When displayed , it is
indicated as manual permanent
ON or OFF status, and "PERM ON"
or "PERM OFF" is displayed.
When displayed , represents
a valid manual ON or OFF state
and displays "OVERRIDE"
"OK "key to confirm the selection key or enter
the program key
"+ "key to add value or change options
"- "key to reduce value or change options
"+", " -" keys pressed about 3 seconds at
the same time put for C1 loop permanent
permanent ON or OFF.
"Res" key is Reset key, you can Reset
the date/time. (however, summer and
winter programs cannot be reset, so it
is necessar y to change by yourself
After pressing "Res" for about 1 second,
the original date and time setting will
only be deleted. The password (if any)
and program setting will still exist. If the
password is wrong, you cannot enter the
main screen, display language and summer
and winter programs is final setting.
figure 1
●Setting operation display language :(see figure 2): When the customer USES it for the first time, please press "Res" to reset.
At this time, "ENGLISH" flashes on the display to indicate that please select the language to use, press
The " + "or "- "keys are used to change six languages, in order (English, Portuguese, Italian,
Spanish, German, French), (see figure 2), press "OK" to confirm the selected language。
●Set a date:
(1) after selecting the language, the display screen displays "2007"; Press the "+" or"-"
Key to the year you want, press "OK" to confirm. Then the moon, the day,time,sec,The setting
of time and minutes is the same as the setting year. (that is, after setting the month, press
"OK" key to enter the day, after setting the day, press "OK" key to enter, when setting
Press "OK" to enter the score).
(2) if only to reset the date, do not need to press the "Res" button to reset, just press the
"Menu" button under the general screen two times (the display screen displays "DAT/TIM"),
and press "OK" to confirm, enter the year, month, day, hour, minute setting and summer and
winter time function selection. Year, month, day, hour and minute are set the same as (1) .
(3) after setting the MINUTE, press "OK" button to confirm, "SUM/WIN" (summer/winter) will display,
because there are many areas in the world do not have summer and winter time, do not need to make
this setting, please press "+" button to select "END", and then press "OK" button to confirm.
● summer and winter time function Settings
(1) under the general screen, press "Menu" button twice (the display screen shows "DAT/TIME"), and
then press "OK" button to enter the setting date function. If you do not need to change the setting,
press "OK" button continuously until the display screen shows "SUM/WIN", and then press "OK" button
to enter the summer and winter TIME function. (see figure 3)
(2)After entering the function, the display screen will display "NO SU/WI".Or "WITH S/W",
use the "+" or "-" key to change the displayNO SU/WI ": NO need for summer/winter time
function, press" OK"Key confirmation can exit the setting; Return to the general picture
state;"WITH S/W" requires summer/winter time function, press "OK" button,The "EUROPE"
option will be displayed after confirmation, at which point "+" or "-" can be used The
change key (you can choose from the following 5 options), press OK when selected
Confirmation.
1. "EUROPE" : summer/winter time in EUROPE;
2. "GB/P" : refers to summer/winter time in Great Britain;
3. "SF/GR/TR" : refers to summer/winter season in Mediterranean region;
4. "USA/CAN" : summer/winter time in the United States and Canada;
5. "FREE" : set summer/winter time by yourself.
● PROGRAM setting :(see figure 4)
(1) in the general picture, press the "Menu" button (at this time the display screenDisplay "PROGRAM"),
and press "OK" to enter the ON/OFF time courseSequence setting function. After entering the function,
the display screen will display "NEW PROG".
②Press "OK"key to enter, and "FREE 44" will be displayedAt present, 44 programs can be set
(up to 44 programs can be set, each Set up a program to display the serial number of the
program will automatically subtract 1.)，Press "OK" to confirm, and "TIME ON" will appear,
indicating setting the contact ON stateChange the "+" or "-" key to "TIME OFF" to indicate
setting the contact "OFF"State, press "OK" key to enter the time setting. Set first after entering
Time (several minutes), please according to your requirements to typing the value, each
completedStep should press "OK" key to confirm, and then set the week to "+" or"-" key
to select your requirements, after the completion of the "OK" key, when the screen"COPY"
appears to indicate whether to COPY this program to another date, To copy, press "OK";
to not copy, press "+"Select "STORE" and press "OK" to jump back to the screen
"NEW PROG" goes on to set up the next program. "NEW PROG" goes on to set up
the next program.
(3) the next program setting with (1), (2) (if you need 44 program can be set according
to this complete), after the completion of the program setting can press the "Menu" button
to exit the program setting.
(4) program inspection and editing: in the display of "NEW PROG" by "+" or "-" key to
select the required function, after selecting the "OK" key to confirm."CHECK" means
to CHECK the content of the existing program (CHECK daily ON/OFF time by week)
"MODIFY" means to MODIFY the program Settings
"CLEAR" means to CLEAR an existing program
"SINGLE" clear SINGLE program, "ALL" clear ALL program Settings
"END" means to END program Settings
(5) clear program Settings (see figure 5) :
To clear the PROGRAM, go to "PROGRAM" setting.
In general, press "Menu" to enter "PROGRAM" and the press "OK"key to confirm.
Press "+" or "-" and select "CLEAR"
Press "OK" to confirm. Select "SINGLE" clear SINGLE program Settings, or select
"ALL" clears ALL program Settings.
figure 2
figure 3
figure 4
figure 5