Juke Audio Sky Speakers Instruction Booklet

Congratulations on the purchase of your Juke Audio Sky Speakers.

These speakers were manufactured with high quality components and

engineered to accurately reproduce sound tracks from both music and

video sources, including today's demanding digital signals. Mounted flush

to a wall or ceiling, architectural speakers are ideal for many applications

where traditional speakers would be impractical or impossible.They are

especially well suited for distributing audio throughout an entire home/

building with excellent sound quality and aesthetic appeal. When properly

installed,this product will provide you with years of entertainment pleasure.

To obtain the full potential of your new speakers, please read all

instructions before starting the installation.

PARTS LIST

Each Juke Audio Sky Speaker package includes the following items:

(2) Juke Audio Sky Speakers with grilles

(1) Hole cutout and paint mask template

(1) Quick Install L-shaped Installation and removal tool

Typically, the speakers should be placed about 1/3rd of the distance

from the corner of the room to the center of the ceiling. If possible,

avoid locating the speakers less than two feet away from the corners

of the room.

Quick Install Speaker System

Juke Audio

Table of Contents

Do you have a question about the Sky Speakers and is the answer not in the manual?

Page 1 Quick Install Speaker System Congratulations on the purchase of your Juke Audio Sky Speakers. These speakers were manufactured with high quality components and engineered to accurately reproduce sound tracks from both music and video sources, including today’s demanding digital signals. Mounted flush to a wall or ceiling, architectural speakers are ideal for many applications where traditional speakers would be impractical or impossible.They are...
Page 2 WALL INSTALLATIONS As a general rule, the speakers should be mounted close to, or slightly above the listener's ear level, when seated. The speakers should be approximately the same distance apart as the distance to the listening area. If possible, avoid locating the speakers less than two feet away from the corners of the room.
Page 3 This will lock the speaker in place. tool to press in the four QuickInstall holes. Your Juke Audio speakers should arrive ready for installation with the QuickInstall mechanism in the “install” position. After connecting the speaker wire to your speaker, place the speaker inside the cutout hole.
Page 4 • Confirm the Juke Audio amplifier is turned on and the zones are turned on for the input / source you are actively playing from. A zone will show as light blue in the Juke Audio interface to signify it is turned “on” for that audio source.