Sinclair CFO-18P User Manual page 15

Table of Contents

Advertisement

TROUBLE SHOOTING
-
BEFORE CALLING FOR SERVICE
Problem
Possible Causes
Dehumidifier
does not dry the
air as it should
Water on the
floor
Not enough time
allowed for unit to
remove moisture.
Airflow is restricted.
Dirty filter.
The Humidity Control
may not be set low
enough.
Doors and windows may
not be closed tightly.
Clothes dry may be
blowing moist air into
the room.
Room temperature is
too low.
Hose connection may
be loose.
Hose is attached but not
draining.
Solutions
When first installed, allow at least 24 hours
to maintain the desired dryness.
Make sure there are no curtains, blinds, or
furniture blocking the front or back of the
dehumidifier. See the CHOOSING A
LOCATION section.
See the CLEAN FILTER section .
For drier air, choose lower humidity desired
in the room, or set dry mode or continuous
mode.
Check that all doors, windows, and other
openings are securely closed.
lnstall the dehumidifier away from the
dryer. The dryer should be vented outside
Moisture removal is best at higher room
temperatures. Lower room temperatures
will reduce the moisture removal rate. This
model is designed to operate at
temperatures above 5
Check the hose connection. See the
CONTINUOUS MODE
Disconnect the hose if using the water tank
or place the hose near a drain.
12
C
°
Section.

Advertisement

Table of Contents
loading

Table of Contents