Related Manuals for Huddly H3SA
Summary of Contents for Huddly H3SA
- Page 1 Huddly USB Adapter Product and Compliance Information Valid for H3SA HD-PGDE-0127-A1...
-
Page 2: Table Of Contents
Contents Safety and Caution Information Temperature Modify User Instructions Installation Power Input Output Recycling Regulatory Compliance Information European Union EMC Directive conformance statement Recycling of waste electronic equipment United States of America and Canada FCC compliance statement Industry Canada statement Australia and New Zealand Korea Taiwan... -
Page 3: Safety And Caution Information
Safety and Caution Information Temperature This device is intended for use in ambient temperatures between 0 °C and 35 °C (32 °F and 95 °F). Avoid using or storing next to heat sources, in direct sunlight, or outside the intended temperature ranges. Modify Modification to thermal solution, device components or enclosure shall violate regulatory compliance requirements and may induce safety hazards. -
Page 4: Power
USB Adapter. Optionally, place the Adapter directly on any horizontal surface. The wall bracket is designed to hold the Huddly USB Adapter only. It should not be used as support for any additional weight. -
Page 5: Regulatory Compliance Information
Regulatory Compliance Information European Union EMC Directive conformance statement This product, a Class A product, has been tested and found to comply with the limits for Class A equipment in accordance with European directives and harmonised standards. The limits for Class A equipment were derived for mainly non- residential environments to provide reasonable protection against interference with licensed communication equipment. -
Page 6: United States Of America And Canada
United States of America and Canada This product carries the cNus safety mark in accordance with the requirements of the applicable standards for Canada and the United States of America. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received,... -
Page 7: Australia And New Zealand
Australia and New Zealand This product, a Class A product, carries the Regulatory Compliance Mark (RCM) in accordance with the requirements of the applicable Australian and New Zealand standards. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures to correct the interference. -
Page 8: Taiwan
明 - “限制物質含量存在的聲明” - 已通過測試和其他質量控制措施得到證 實。 Huddly agree to cooperate with BSMI as Article 49 of the Commodity Inspection Act stipulates, and will provide the correct and relevant documents, if needed for verification and on BSMIs request, and within 28 working days. -
Page 9: Point Of Contact
Point of Contact Huddly AS, Attn: Compliance Haakon VIIs gate 5 NO-0161 Oslo, Norway Support For more information visit: https://support.huddly.com EULA By using this product, you agree that your use of this product is subject to our End User Licence Agreement terms available at: https://www.huddly.com/eula/...
Need help?
Do you have a question about the H3SA and is the answer not in the manual?
Questions and answers