Ebyte E90-DTU User Manual page 15

Chengdu Ebyte Electronic Technology Co.,Ltd.
After the configuration is complete, the device's LINK indicator is always on and the NetAssist connection to
the "Gateway Radio" is as shown below:
Data sending and receiving test (in UDP server mode, data must be sent by the PC first, UDP can dynamically
adjust the destination address then, the data sent by serial port can only be received by the last communication
UDP):
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
E90-DTU(xxxSLxx-ETH)_V2.0 User Manual
14