Table of Contents
Advertisement
CERAMIC CAPACITORS
Add the ceramic capacitors now. There are just five of them of the same value - 470nF (they are
marked "474" on itself).
FEMALE PINHEADERS
Now let's do the female pinheaders: 2 pin ones (6x) and 3 pin ones (8x). It may take a little patience
to insert them well. Be sure to solder them straight.
SWITCH & POTENTIOMETERS
Go for the switch. Be sure that it's straight from all views and right on the board. Then move to
soldering of potentiometers (B100k). Proceed this way: install potentiometers in straight, solder just
one leg, check the position and solder the rest if there is no problem (if you don't solder the pots
straight you won't be able to put the enclosure on easily).
WHITE LED
Solder the white LED - be sure to insert the longer lead into the plus (+) hole. Push the LED down to
the PCB.
CUTTING
Now you can cut the side legs from pots.
6
Advertisement
Table of Contents
