Avantree Soundbyte T User Manual page 12

User Manual
NOTE1: Most cases where your device & the radio fail to
connect happen because the device is not properly placed
into PAIRING mode. Double check that your device is
successfully in PAIRING MODE (typically indicated by an
LED indicator's alternate red & blue ashes). For more
details, please refer to your device's online user manual.
NOTE2: Bluetooth devices normally automatically
reconnect to their last paired / connected device. You may
need to turn the Bluetooth OFF on any previously used
devices in order to avoid interference.
For Subsequent Use
Turn on both the radio and your headphones and press
the button once. They should automatically reconnect. If not,
repeat the steps above to re-pair them.
10
SOUNDBYTE T