VOIP841 FIRMWARE UPGRADE PROCEDURE
The last available version on Philips web site is:
1°) Installation for upgrade:
-
The Philips VOIP841 must be plug on a router where a PC is already plugged.
-
Here under a sample of installation:
2°) Read my actual VOIP841 version:
-
Select on the handset "Menu/Settings/Information" and valid by "Select".
-
The handset display several information among which the Firmware version.
3°) Read my actual VOIP841 IP:
-
Select on the handset "Menu/Settings/Information" and valid by "Select".
-
The handset display several information among which the IP address.
4°) Save the last firmware file available on Philips web site:
-
Click on the below link, to download the last available Firmware version:
http://www.p4c.philips.com/cgi-bin/dcbint/get?id=voip8411b/01&doctype=fus&redirect=1
-
Save the downloaded ZIP file under your computer, and then unzip it.
Warning:
*
Should you encounter any difficulty to open this link, please check your current version of
Adobe Acrobat Reader. For an optimal use, we recommend to run the document under
version 7.0 minimum.
If you cannot, or if you do not wish to upgrade your Adobe Acrobat Reader version, please
type in the complete link in your Internet Explorer, to open the document.
V1.0.4.80
Sample: "Firmware Ver.:1.0.4.10"
Sample: "IP address: 192.168.2.3"
*