GHM Greisinger USB 3100 N Installation And Operating Manual

Interface converter

Advertisement

Quick Links

S62.0.01.6C-02
Interface converter
USB 3100 N
Installation and operating manual
WEEE-Reg.-Nr. DE 93889386
GHM Messtechnik GmbH • Standort Greisinger
Hans-Sachs-Str. 26 • D-93128 Regenstauf
+49 (0) 9402 / 9383-0
+49 (0) 9402 / 9383-33
info@greisinger.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the USB 3100 N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GHM Greisinger USB 3100 N

  • Page 1 S62.0.01.6C-02 Interface converter USB 3100 N Installation and operating manual WEEE-Reg.-Nr. DE 93889386 GHM Messtechnik GmbH • Standort Greisinger Hans-Sachs-Str. 26 • D-93128 Regenstauf    +49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.de...
  • Page 2 S62.0.01.6C-02 page 2 of 4 Content 1. Intended use ..........................2 2. General advice .......................... 2 3. Safety instructions ........................2 4. Installation ..........................3 5. Specification ..........................3 System requirements: ......................3 6. Disposal notes ........................... 3 7. Frequently asked questions (FAQ) .................... 4 How to check whether the adaptor has been installed correctly and via which COM-port can I approach the installed adaptor? .................
  • Page 3 S62.0.01.6C-02 page 3 of 4 4. Installation For installation of the device drivers a user account with an administrator-authorisation is required. If you haven’t an appropriate authorisation please consult your system administrator. If you already have a device installed with the same USB-Chipset the adaptor will be installed automatically, if not the system will request you to install the driver.
  • Page 4 S62.0.01.6C-02 page 4 of 4 7. Frequently asked questions (FAQ) 7.1 How to check whether the adaptor has been installed correctly and via which COM- port can I approach the installed adaptor? Start the Device-Manager and open the submenu “Ports (COM & LPT)” If the installation was successful, there will be the entry “USB Serial Port (COMx)”, in which the x after the Com indicates the available COM-port (i.e.

Table of Contents