Advertisement
Disassembly and Assembly Instructions
7
1) Screw the SCREW 4 POINTs.
2) attach the SCREW COVER.
①
1) Fit to the fixing hole.
7
1) Assemble the KEY PAD.
1) Attach the key pad to right position to fix the
flange.
②
①
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
8
1) Lift up the SLIDE hinge and assemble
the FRONT then SCREW 6 POINTs.
1) Please be careful not to scratch and damage to the
phone.
2) Please be careful not to damage to the FPCB.
8
1) Open the SLIDE then connect Main PCB and
FPCB connector.
1) Check the kind and position of the Key then
assemble.
2) Please check the state of connection of camera
connector.
11-5
①
Advertisement
