Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Benchmark 1282-701
- Page 1 5 Year Limited Warranty...
- Page 2 •Please note (where the ¼” NPT connecter is not already installed on the tool) your tool may be shipped with a black plastic cap installed in the air inlet. Pry the cap out prior to installing the ¼” NPT connector. •...
- Page 5 SYMBOL MEANING Oxygen nydrogen explosive Combustible...
- Page 8 SYMBOLS Read operator s manual: To reduce the risk of injury, user must read and understand operator s manual before using this product. Risk to hearing Always wear ear prptection when using this tool ,failure to do so may result in hearing loss.
- Page 10 Be sure to use a proper air compressor with air-powered tools. The compressor should be able to supply a minimal air delivery of 4 CFM @ 90 PSI to ensure the compressor can run continuously with the tool. 4-5 Gallons Light-duty and Light-duty and Light-duty and...
- Page 12 It is recommended that a filter-regulator-lubricator is used and located as close to the tool as possible. If a filter-regulator-lubricator is not installed, place up to 6 drops of compressor oil into the NPT inlet plug before each use. If a filter-regulator-lubricator is installed, keep the air filter clean. A dirty filter will reduce the air pressure to the tool, which will cause reduction in power, efficiency, and general performance.
- Page 13 If it is necessary to store the tool for an extended period of time, apply a generous amount of lubrication before storing. The tool should be allowed to run for approximately 30 seconds after lubricating, in order to ensure that the lubrication is uniformly distributed throughout the tool.
- Page 15 • Inspect the trigger, the spring, and the safety mechanism for free movement on a regular basis in order to ensure that the safety system is fully functional. • Verify that no part is loose or missing and that no part is stuck or jammed. •...
- Page 18 Key# Part # Part Name...
- Page 20 5 Year Limited Warranty Made in China ©...
Need help?
Do you have a question about the 1282-701 and is the answer not in the manual?
Questions and answers