GE JVM7195 Owner's Manual page 20

About other features.
Vent Fan
Surface
Light
Mute
On/Off
Settings
Settings
Settings
Reset
Filter
20
Vent Fan
The vent fan removes steam and other vapors from surface cooking.
Press Vent Fan once for boost fan speed, twice for high fan speed, a third time for low fan
Surface Light
Press to turn the surface light on or off.
Mute
The beeper sound level can be muted. Press Mute
On/Off.
Automatic Fan
An automatic fan feature protects the microwave from too much heat rising from the cooktop
below it. It automatically turns on at low speed if it senses too much heat.
If you have turned the fan on you may find that you cannot turn it off. The fan will
automatically turn off when the internal parts are cool. It may stay on for 30 minutes or more
after the cooktop and microwave controls are turned off.
Clock Mode
You can change clock 12/24hrs display mode.
1. Press Settings.
2. Press Express Cook pad 1.
Display Speed
You can change display speed.
1. Press Settings.
2. Press Express Cook pad 2.
Sound Level
You can change sound level.
1. Press Settings.
2. Press Express Cook pad 3.
Reset Filter Button
The light will illuminate after approximately 6
months of alert user to replace the charcoal
filter (if used) and clean/replace the grease
filters. Reset by push and hold 3 seconds.
On some models, there is a night light option.
Press Surface Light once for bright light, twice for the
night light or three times to turn the light off.
3. Select 12hrs/24hrs.
1 - 12 hrs
2- 24 hrs
3. Select new display speed.
1 - slow
2 - normal
3 - fast
3. Select sound level.
0 - mute
1 - low
2 - normal
3 - loud
Filter Replace Reminder
The charcoal/grease filter should be replaced
when it is noticeably dirty / discolored(usually
after 6-12 months, depending on hood usage)
or filter replacement LED is on.
When the Filter Replace LED turned on,
replacefilter and press Reset Filter and hold for
3seconds to reset.