Advertisement
O
C
ABLE
button on the remote, then the
C
A
I
ABLE OR
NTENNA
NPUT
CHANNEL
N
OTE: If you went
(or press the MENU
through First Time Setup
on the TV) to select the word
(page 3), this task has already
CABLE with the TV's on-
been completed for you.
screen Arrow.
You need to make sure that
the TV is set to pick up either
Cable TV stations or Antenna
signals. In other words, the
TV needs to know whether
you have connected a Cable
TV signal or a normal anten-
na to its ANTENNA plug (see
page 2).
C
HANNEL
button on the remote, then the
A
/D
C
DD
ELETE
HANNELS
CHANNEL
A
uto-Program (see page 3)
(or the MENU
adds all the channels it
TV) to select the word CHAN-
can find (on your Antenna or
NEL with the TV's on-screen
Cable TV system) into the
Arrow.
TV's memory. Save/Delete
channels makes it easy for
you to add other channels, or
drop unwanted channels,
from the list of channels in
the TV's memory.
S
URF
button on the remote, then
C
S
HANNEL
URF
press the CHANNEL
A
series of up to eight pre-
(or the MENU
viously viewed channels
on the TV) to select the word
can be selected from the
SURF with the TV's on-screen
SURF button on your remote
Arrow.
control. With this feature you
can easily switch between
different TV programs that
currently interest you.
-S
MENU C
N
CREEN
BEGIN
Press the MENU (M)
or
buttons
or
3
BEGIN
Press the MENU (M)
or
buttons
or
on the
4
2
BEGIN
Press the MENU (M)
or
or
buttons
3
1
2
ONTROLS
Press the VOLUME (+)
or (-) buttons (on the TV or the
remote) to select either:
YES-
If you DO have Cable
TV connected to the
TV. Channels 1-125
can be selected.
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
1
2
Press Channel Number
buttons on the remote (or
CHANNEL
buttons on the
TV) to select the channel you
want to SAVE (or DELETE.)
12
CHANNEL
SLEEP
CAPTION
VOL. BAR
EXIT
1
SETUP
3
Press the VOLUME (+)
or (-) buttons to select the
ALT. CHN.(Alternate Channel)
or SURF. See the Smart Help
section (to the right) for an
explanation on the use of ALT.
CHN. and SURF features.
SURF
ALT. CHN.
SMART SND
CABLE
CHANNEL
SLEEP
CAPTION
Note: There are two methods to delete channels from the 8-channel SURF control ring:
• To remove all channels from the SURF memory (with the exception of channel 3
which will be left within the SURF list) - Select the CABLE control in the on-screen
menu and press the (+), (-) buttons. Adjust the control "YES/NO/YES" if you have
Cable TV; or "NO/YES/NO" if you are in the broadcast Antenna mode.
• To remove all channels from the SURF memory (with the exception of the last
viewed and currently selected channels) - From the SURF on-screen control option
press the (+) or (–) button to select the ALT.CHN. control in the on-screen menu. Press
the (+) or (–) button again to reselect the SURF option.
4 - IB7754 E001
(
)
CONTINUED
Press STATUS button on
the remote control to clear the
screen.
CABLE
YES
CHANNEL
SLEEP
CAPTION
VOL. BAR
EXIT
Press the VOLUME (+)
button to SAVE the selected
channel number into memory.
Press (-) button to DELETE a
channel from memory.
SAVED
DELETED
S
H
MART
ELP
To SAVE a channel above 100, use the CH
buttons on the TV. The remote number
buttons only go up to channel 99.
Press STATUS button on
the remote control to clear the
screen.
ALT. CHN. (Alternate Channel) -
Current and one previous channel.
SURF - Up to eight channels in a
channel Surf ring.
SURF
S
MART
H
ELP
Try it out.
Press the CHANNEL
buttons and scan
the channels. CH
works only after STA-
TUS button is pressed
to clear the screen (or
Menu times out -
about 1 minute.)
Remember, to set the
TV to select the chan-
nels on your Cable
system, or in your
area, see the
NO
"Autoprogram" steps
in the SETUP section
on page 3, and
"Adding Channels " in
the section below.
Press the STATUS button
to clear the screen after adding
(or deleting) all the channels
you want.
S
MART
H
ELP
Remember, to use
ALT. CHN., first select the
desired channels with the
number buttons on the
remote. (For example: 11,
and 22.) Then press the
SURF button on the
remote to quickly toggle
between the two channels.
The Surf control will allow
up to eight channels to be
put into the "SURF
Memory." Enter the num-
ber of the desired channel;
then press the SURF but-
ton to add it into the SURF
Memory. (Example: With
the SURF control selected
in the Menu, you press
channel 02, then the Surf
button (while the channel
display is still visible on-
screen) to add channel 02
to the Surf memory.
Repeat for up to 8 chan-
nels.
Advertisement
