Assembly (continued)
Assembling the cylinder
□
secure the cylinder by tightening the screw in the gas
tank support. Connect the hose and regulator to cylinder.
NOTE: The propane cylinder is sold separately.
Use a standard 20 lb. propane cylinder only.
Put the hose away from the bowl base during
connect the propane cylinder.
□
Connect: Hand-tighten the coupling nut clockwise until
it comes to a full stop. Firmly tighten by hand only.
□
To Disconnect: Fully close the tank valve by turning
clockwise. Turn the coupling nut counterclockwise until
the regulator assembly detaches.
Installing the AAA battery
□
Open the igniter and place the AAA battery (DD) into
the igniter. Then tighten clockwise.
H ,
10
AAA Battery