INFINITIPRO BC600 - Hot Air Brush Instructions & Styling Guide

GET TO KNOW YOUR DEVICE

IMPORTANT SAFETY INSTRUCTIONS

When using electric appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER

Any appliance is electrically live even when the switch is off. To reduce the risk of death or injury by electric shock:

1. Always unplug it immediately after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other liquids.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged or dropped into water. Return the appliance to an authorized service center for examination and repair.
5. Keep the cord away from heated surfaces. Do not wrap the cord around appliance.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked.
   Keep the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. Do not use with a voltage converter.
15. While using this appliance, keep your hair away from the air inlets.
16. This appliance is not a toy. Keep away from children.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This appliance is intended for household use. Use on Alternating Current (60 hertz) only. Standard curling appliances are designed to operate at 110 to 125 volts AC.

This appliance has a polarized plug (one blade is wider than the other.) As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE APPLIANCE

This appliance is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that renders it inoperable under some abnormal conditions, such as immersion in water. To make sure the ALCI is functioning properly, perform the following test. The purpose of this test is to allow you to make sure the water sensing system (ALCI) is working.

1. Plug in the appliance and press test button on plug.
2. The appliance will stop working. There will be an audible click and reset button will pop out. This indicates that the ALCI is functioning properly.
3. To reset ALCI with a reset button, unit should be unplugged. Then push reset button in, and reinsert plug into outlet.
4. If ALCI is not functioning properly, return appliance to nearest service center.
5. It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.
6. Be sure to repeat test every time you use the unit to confirm ALCI is operational.
   Should the appliance go off and the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from outlet and allow the appliance to cool. Reinsert plug into outlet.
   The appliance should then function normally. If not, return it to an authorized Conair Service Center for evaluation and repair.
   NOTE: Do not use this styling appliance on hair extensions.

GETTING STARTED

This hot air brush is perfect for adding gorgeous volume and shine to styles. The titanium ceramic barrel gives fullness and body as you style, while the soft bristles create ultimate shine and smoothness.

ADVANCED IONIC TECHNOLOGY

Many aspects of modern living, including air conditioning, contact with man-made fibers and air pollution, contribute to a buildup of static electricity in the hair. Even brushing and towel-drying the hair can increase these levels, causing the surface of the cuticle to become rough.

Consequently, hair may have a dull appearance. Also, high levels of static charge cause hair to become flyaway and difficult to style.

The powerful ion generator produces a stream of negative ions that acts to neutralize the static charge, smoothing the scales on the cuticle for shiny, smooth and manageable hair, so you can achieve your desired style easily.

NOTE: The unit may produce a clicking sound at times, which is normal for a high-output ion generator.

TITANIUM CERAMIC TECHNOLOGY

The barrel of this premium hot brush is coated with a combination of the best materials for styling. A fusion of titanium and ceramic evenly distributes heat to gently style and protect hair from damaging hot spots. Hair wraps easily over the surface of this ultra-smooth barrel.

Barrel is exceptionally easy to clean, and you'll discover this combination of technologies leaves your hair silky smooth.

HEAT SETTINGS

There are 2 heat settings, plus a cool setting. Use the high heat setting for initial drying, and the low heat setting as hair begins to dry and for styling. Use the cool setting to set the style for long-lasting results. To select the low heat, slide the ON/OFF switch to the first position; the second position is for the high heat, and the third position is for the cool setting.

INSTRUCTIONS FOR USE

• If you have long or thick hair, you may find it quicker and easier to use a hair dryer first to rough-dry your hair and remove the excess moisture. For added volume, turn your head upside down as you dry.
• Once the hair is 80% dry, you should start to create your style using the styler.

MAXIMUM VOLUME AND BODY

1. Start by sectioning the hair.
2. To turn the appliance on, slide the ON/OFF switch to the correct heat setting for your hair.
3. Place the appliance into the hair, close to the roots, and brush through the section to remove any tangles.
4. For added root lift, hold the brush in place at the roots for a few seconds.
5. Use the cool setting to set style for long-lasting results.
6. After use, switch off and unplug the appliance.
7. Allow to cool before storing away.

CLEANING THE FILTER

1. Ensure the unit is switched OFF, unplugged, and cool.
2. Holding the handle of the unit, grip the rear filter and turn counterclockwise, as far as the rear filter will turn, and pull away from the unit.
3. Using a soft brush, clean any hair and other debris from the fiter.
4. Replace the rear filter by aligning the grooves and turning clockwise, until the rear filter has clicked back into position.

IF YOU MUST USE YOUR HOT AIR STYLER IN THE BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide which type is best for you – a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCIs in the bathrooms, garages, and outdoor outlets of all new homes.

WHY DO YOU NEED A GFCI?
Electricity and water don't mix. If your HOT AIR STYLER falls into water while it's plugged in, the electric shock can kill you...even if the switch is off. A regular fuse or circuit breaker won't protect you under these circumstances. A GFCI offers you far greater protection.

A GFCI can save your life! Compared to that, the price is small! Don't wait...install one now!
*A GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the electricity flow.

USER MAINTENANCE

Your appliance is virtually maintenance free. For proper performance, the appliance must be kept clean. Blocked or clogged air intake vents will cause the appliance to overheat. When cleaning is needed, unplug the cord and clean dust and lint from air intake openings with a small brush. The outer surface of the appliance should be wiped clean with a cloth only. If abnormal conditions occur, unplug the appliance, allow it to cool and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit.

Inspect the cord frequently for damage. STOP USE IMMEDIATELY if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your appliance should be disconnected and stored in a safe, dry location, out of reach of children. Do not wrap line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.

IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU'RE WRONG.

KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES

LIMITED THREE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 36 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 3 years from the date of manufacture.

BEAUTY TIPS

Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307

Please register this product at
www.conair.com/registration

Documents / Resources

References

• Welcome | Conair

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download INFINITIPRO BC600 - Hot Air Brush Instructions & Styling Guide