Table of Contents
Advertisement
Playing a CD (continued)
To
Do this
Press p.
Stop playback
Press P. Press again to resume
Pause
playback.
Select a track
During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press AMS* + (to go
forward) or AMS* = (to go
backward) on the remote.
Press and hold ) or 0 during
Find a point in
a track
playback, and release at the
desired point.
Select a CD
Press one of the DIRECT PLAY
buttons (or DISC SKIP).
Play only the
Press 1/ALL DISCS repeatedly
CD you have
until "1 DISC" appears.
selected
Play all CDs
Press 1/ALL DISCS repeatedly
until "ALL DISCS" appears.
Press 6 OPEN.
Remove or
change the
CDs
Adjust the
Turn VOLUME (or press
volume
VOLUME +/– on the remote).
* AMS: Automatic Music Sensor.
Tips
• Pressing · while the system power is off
automatically turns on the system and starts CD
playback if there is a CD on the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing ·
or one of the DIRECT PLAY buttons (Automatic
Source Selection).
• If there is no CD in the player, "NO DISC"
appears in the display.
• You can change the CD in the loading position
during playback.
12
Advertisement
Table of Contents
