Tehnologistic train-O-matic Shine Midi Ana 02 WW User Manual

Advertisement

Shine Midi Ana 02 WW
Shine Midi Ana 02 CW
User Manual
- version 0.0.3 –
by

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the train-O-matic Shine Midi Ana 02 WW and is the answer not in the manual?

Questions and answers

Summary of Contents for Tehnologistic train-O-matic Shine Midi Ana 02 WW

  • Page 1 Shine Midi Ana 02 WW Shine Midi Ana 02 CW User Manual - version 0.0.3 –...
  • Page 2 Shine Midi Ana 02 Version 0.0.3 User Manual © Copyright 2013 Tehnologistic SRL All rights reserved No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, without the written permission of...
  • Page 3 Shine Midi Ana 02 Version 0.0.3 User Manual 1. Features - 9 low current high brightness white LED lighting module - suitable for carriage, platforms or buildings interior lighting. - the module is usable connected to DC/DCC - external AC/ DC power supply operation also possible - user adjustable length in 2 aditional steps, max 210 min 190 mm.
  • Page 4 Shine Midi Ana 02 Version 0.0.3 User Manual 4. Cutting to size The operation can be performed at the points indicated in the below illustration. Care shall be taken to not damage the circuit. Use a cutting plier and straight, firm movements for cutting. Clean the debris at the edges of the pcb after the cutting, to avoid short circuits.
  • Page 5 Shine Midi Ana 02 Version 0.0.3 User Manual The connections marked with 1 and 2 have to be connected to the DC/DCC track voltage through the use of the current pickups of the carriages. The connections are available at both end of the module. Shine Midi Ana DC/DCC Connection points...
  • Page 6 Shine Midi Ana 02 Version 0.0.3 User Manual 6. Connecting the anti-flickering capacitor On both ends of the module, there are available several connections for the anti-flickering capacitors. Please solder the supplied capacitors in the proper position. The capacitors are polarized electronic devices. Please respect the polarity as indicated! Soldering the capacitors with wrong polarity can damage the module, or/and the capacitors! Right...
  • Page 7 Shine Midi Ana 02 Version 0.0.3 User Manual 7. Advanced features The PCB layout of the Shine Midi Ana 02 module allows the repositioning of the LEDs which results in a better fit in the carriages. The LEDs can be shifted left and right in several positions with a ~ 3 mm pitch, as illustrated below.
  • Page 8 Shine Midi Ana 02 Version 0.0.3 User Manual Copyright © 2013 Tehnologistic SRL All rights reserved The information in this document is subject to change without notice “train-O-matic” and the logo are registered trademarks of SC Tehnologistic SRL www.train-o-matic.com www.tehnologistic.ro Tehnologistic SRL Str.

This manual is also suitable for:

Train-o-matic shine midi ana 02 cw

Table of Contents