Cs Maintenance Menu; How To Enter Into Cs Maintenance Menu; Purpose; Key Command - Panasonic TH-43EX600G Service Manual

5 CS Maintenance Menu

5.1.

How to enter into CS Maintenance Menu

5.1.1.

Purpose

After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [ RED ] button of the remote control three times within 2 seconds.
Note:
CS Maintenance Menu can not be entered when 3D signal input.
Input 2D signal to enter CS Maintenance Menu.
5.1.2.

Key command

Press the Cursor key [Up/Down] on the remote control to select the functions.
5.1.3.

How to exit

Press the [EXIT] button on the remote control.
5.2.

Repack

1. Select [OPT] in CS Maintenance Menu.
2. Press [OK] button or Cursor key [Right] on the remote control.
Exit:
Press the [Exit] button or the [Return] button on the remote control.
9
TH-43EX600G/K/S