1. Manuals
  2. Brands
  3. RQ-HUNO Manuals
  4. Robotics
  5. Zero Position
  6. How to adjust

RQ-HUNO Zero Position How To Adjust

Hide thumbs

Advertisement

Table of Contents

How to Adjust
"Zero Position" of RQ-HUNO
"Zero Position" of RQ-HUNO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zero Position and is the answer not in the manual?

Questions and answers

Summary of Contents for RQ-HUNO Zero Position

  • Page 1 How to Adjust “Zero Position” of RQ-HUNO “Zero Position” of RQ-HUNO...
  • Page 2 1) Power Off “RQ-Controller”...
  • Page 3 2) Press “Button 1” first and “Power Button” together. Button 1 Power Button...
  • Page 4 3) Then, you will see the “Button 1” – “RED” and “BLUE” LED is turned ON Button 1 Button 1 “RED” and “BLUE” LED...
  • Page 5 4) Also, you will see the “BLUE” LED of “Smart Servo ID 00” is turned ON . This means “ID 00” servo “zero position” is ready to be adjusted. Smart Servo ID 00 “BLUE” LED “BLUE” LED...
  • Page 6 5) If you press “UP” button of IR remote controller, “Smart Servo ID 01 BLUE-LED” is turned on. Smart Servo ID 01 “BLUE” LED UP button of IR remote controller •In order to select “Smart Servo ID 02=>03=>04…..” in order, press “UP”...
  • Page 7 6) For example, Smart Servo ID 01 is turned ON (selected). In order to adjust ID01 position value, press “LEFT” or “RIGHT” button of IR remote controller. Smart Servo ID 01 “BLUE” LED LEFT button of LEFT button of IR remote controller RIGHT button of IR remote controller...
  • Page 8 7) If you press “LEFT(-)” or “RIGHT (+)”button of IR remote controller, Smart Servo ID 01 position value will be increased(+) or decreased(-). Back Heels • Tip - Match the “Back” and “Heel” to be straight line. - Match the “Right Leg” and “Left Leg” straightly.

Table of Contents