Diagcar ENIGMA User Manual

NISSAN MICRA FROM 2003 V2

DASHBOARD PHOTO:

FOLLOW THIS INSTRUCTION STEP BY STEP:

Remove the dashboard and open it carefully.
1.
Remove the back side of the dash to get to the main board and identify it.
2.
C7
Solder cable
3.
PHOTO1.
Make sure that the connection you made is secure.
4.
EDITOR
Use the
5.
READ KM
Press the
6.
Now you can use the
7.

PHOTO 1:

Solder cables according to the colors like shown on the photo above.
FOR MORE INFORMATION
0034 983 359 787
Call
DIAGCAR ELECTRONICS S.L.
E N I G M A U S E R M A N U A L
to the points on the back of the dash mainboard as shown on
to save memory backup data.
button and check if the value shown on the screen is correct.
CHANGE KM
function.
www.enigmatool.com
or visit
Ebanistería 1A, 47610 Zaratán, Spain

REQUIRED CABLE(s):

C7