Table of Contents
Advertisement
Hotel Mode
1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu,
please enter the following command (within 2
second).
[TV] : Vol.[Down] + [REMOTE] : AV (3 times)
Then, the Hotel mode setup menu is displayed.
Hotel mode
Hotel mode
Initial INPUT
Initial POS
Initial VOL Level
Maximum VOL Level
Button Lock
Remote Lock
Private Information
Quick Start
Welcome Screen
Import Welcome Screen
DVB-C Auto Channel List Update
Start Hotel Portal
Import Hotel Portal Url
Select
Change
RETURN
3. To exit the "Hotel mode":
Switch off the power with the [POWER] button
on the main unit or the [POWER] button
on the remote control or pressing [EXIT] button
on the remote control.
4. Explain the Hotel mode setup menu.
*
Quick Start setting can by copied to other TVs using
hotel model clone.
Clone from a product whose default configuration has
been changed may result in higher energy consumption
of the product.
Off
Off
Off
0
100
Off
Off
Keep
On
Off
On
On
Off
Off
ITEM
Hotel Mode
Select hotel mode ON/OFF
Initial
Select input signal modes.
INPUT
Set the input, when each time power is switched on.
Selection:
Off/DVB-S/DVB-T/AV/HDMI1/HDMI2/HDMI3/HDMI4
*Off: give priority to the last memory. However, Euro
Model is compulsorily set to TV.
Initial POS
Select programme number.
Selection:
Off/0 to 99
*Off: give priority to the last memory
Initial VOL
Adjust the volume when each time power is
Level
switched on.
Selection/Range:
Off/0 to 100
*Off: give priority to the last memory
Maximum
Adjust maximum volume.
VOL Level
Range:
0 to 100
Button Lock
Select local key conditions.
Selection:
Off/SETUP/MENU
*Off: altogether valid
*Setup: only F-key is invalid
(Tuning guide (menu) can not be selected.)
*MENU: only F-key is invalid
(only Volume/Mute can be selected.)
Remote
Select remote control key conditions.
Lock
Selected:
Off/SETUP/MENU/VOD
*Off: altogether valid
*Setup: only Setup menu is invalid
MENU: Picture/Sound/Setup menu are invalid
Private
Select private information for VIERA Cast is Keep or Reset if
Information
Hotel mode is set to [On] when TV power on.
Selection :
Keep/Reset
•Keep: private information for VIERA Cast is keep
•Reset: private information for VIERA Cast is reset
Quick Start
TV will operate in active standby if Quick Start is "On" and
Hotel Mode is enabled.
*
Orange LED indicates active standby.
Selection:
On/Off
*Note:
Changing the default configuration may result in higher energy
consumption of the product.
Welcome
Can be switched on only if "Welcome screen" was installed.
Screen
Otherwise, item is inactive.
Welcome Image will be displayed as soon as possible (approx.
6 seconds after power-up).
Import
Welcome message must be loaded and activated in the hotel
Welcome
mode.
Screen
The file name must be "welcome.jpg"( file size no bigger than
1MB).
Upload "welcome.jpg" to TV set form USB stick.
Welcome Screen will be displayed at power-up and will
disappear automatically or may be terminated by any key
press.
Welcome image can be cloned to other TV sets using
"hotel.pwd" clone feature.
DVB-C Auto
The possibility to enable the automatic service list update and
Channel
to the "New service found" pop-up message (or disable "new
List Update
service found" popup .
Selection: On/Off
Start Hotel
Allow user to start a Portal-Application with dedicated key.
Portal
Selection: Off/Home/App/Menu
Import Hotel
Import Hotel Portal with USB:
Portal URL
Filename must be "hotel_url.txt"
Content of hotel_url.txt: e.g. http://192.168.1.1/hotel/index.html
Located in root directory.
Existing file will be overwritten.
Activation: turn Off/On TV set.
File will be deleted at shipment : While pressing
[VOLUME ( - )] button on the main unit, press [MENU] button
on the remote control for more than 3 seconds.
19
Function
Advertisement
Table of Contents
