feather & black MALVERN Quick Start Manual

MALVERN Bunk Bed
IMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERE NCE
Thank you for buying the MALVERN Bunk Bed
• Please take a few quiet minutes to read these instructions
• It is recommended that this product is assembled by two adults
• This product contains small parts, kee p small children clear of the assembly area
• Lay out the parts on a clean, flat surface and compar e with the parts checklist. Save
all packaging until assembly is complete to avoid accidentally discarding fittings
PRODUCT SAFETY
• All assembly fastenings should always be tightene d properly and care should be
taken that no fittings are loose
• Bunk bed or high bed should not be used if any structural part is broken or missing
• Children can strangle in items such as ropes, strings, cords, harnesses and belts
attached to or hung on a bunk bed/high bed
• WARNING !!! Children can become trapped between the bed and the wall.
To avoid risk of serious injury the distance between the top of safety barrier and the wall
shall not exceed 75 mm or shall be more than 230 mm
• WARNING !!! High beds and upper bed of bunk beds are not suitable for children
under six years due to the risk of injury from falls
• Maximum thickness of the mattress 220 mm
PRODUCT CARE
• Wipe clean using a soft damp cloth followed by dr y cloth
• Do not use abrasives or cleaning products which may contain ammonia or solvents
• Take care when handling or moving the furniture . Careless handling can damage
wooden furniture, try to lift rather than drag
• Colour may vary due to this being a natural product
TOOLS REQUIRED
PAGE 1 of 6
(EN 747 - 1 : 2012)