MeLaSen Electronics MLSH8 Operating Instructions

Model: MLSH8
ISED Certification No.:26807-MLSH8
FCC ID: 2AYGE-MLSH8
Manufacturer: MeLaSen Electronics Ltd.
Address:No.29 Industrial Road, Xiaolan Industrial Estate, Xiaolan Town, Zhongshan, 528415 Guangdong, P.R.
China

REMOTE CONTROL OPERATING INSTRUCTIONS

1. All ON/ OFF button.
2. Press and release the
3. Press and release the
+
4. Press to increase speed and
+
5. Press to increase brightness and
6. Press and release the button
Alternates through speeds 1-5.
7. Press and release the
8. Press the (2H/4H/8H) buttons to automatically turn the fan off after 2, 4 or 8 hours.
Install two 1.5V battery into the remote control. To prevent damage to
the remote control, remove the battery if not used for long periods of time.
Warning: Do not short-circuit, disassemble, heat up,
connect improperly, or dispose of used batteries in fire. Do
not recharge or mix batteries with used or other battery
types. Immediately remove used batteries.
WARNING: a) The cells shall be disposed of properly,
including keeping them away from children; and
b) Even used cells may cause injury.

LEARNING PROCESS

Note: After the AC power is on, do not press any other button
on the remote control before pressing the
Doing so will cause the procedure to fail.
Should you desire to use another remote control unit with your
new fan, install one using the steps below:
□
Turn the main power source off to begin the learning process.
□
Return the power to the unit.
□
Within 3 seconds of turning the fan's AC power ON, press and release
the button and then press and release the
learning function. A beeping sound is emitted when pairing is complete.

INSTALLING THE REMOTE CONTROL HOLDER

□
Install the remote control holder spacer onto the wall using two remote control
holder screws, and then attached the remote control holder onto the
spacer, ensure two parts fit together and no gaps, install the remote control
holder screws.
button, the fan will turn ON and OFF accordingly.
button, the light will turn ON and OFF accordingly.
-
to decrease speed. You can select fan speed 1-6.
-
to decrease brightness.
will activate the Comfort Breeze mode.
button to change the light colour from warm light to white light.
(ON/OFF) button.
button to enter the
LED light
2
ON / OFF
4
6 SPEED
6
BREEZE
8
2 4
HR
TIMER
WARNING: Chemical Burn Hazard. Keep batteries away
from children. Always completely secure the battery
compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and
keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek
immediate medical attention.
1
ALL
3
ON / OFF
5
BRIGHTNESS
7
COLOR TEMP.
8
HR
HR
spacer