Advertisement
Quick Links
Mach3 6 Axis MPG CNC Wireless Controller
Driver Installation & Use:
1. Insert USB receiver to PC USB interface until the driver file installation is over.
2. Find "PlugIns" folder in the disk where you install MACH3 software, open the CD in the packaging box,
copy driver file XHC-shuttlepro.dll into folder "PlugIns".
3. Macro file installation: Copy all the files in the CD macro folder into mach3/macros/Mach3Mill
4. Please open the battery cover and install 2pcs AA batteries, press down power on button, then you
can use it directly.
MPG Function Explanation:
Icon
Model: WHB04B-6
User Manual
Function
Reset button
Stop button
Start/Pause button: Press down start button, machine starts to work, press down
pause button, then machine stops working.
Macro-1/Feed+ button: When press button alone, macro function -1 works; when
press
+
, processing speed increases.
Advertisement
Summary of Contents for XHC WHB04B-6
- Page 1 2. Find “PlugIns” folder in the disk where you install MACH3 software, open the CD in the packaging box, copy driver file XHC-shuttlepro.dll into folder “PlugIns”. 3. Macro file installation: Copy all the files in the CD macro folder into mach3/macros/Mach3Mill 4.
- Page 2 Macro-2/Feed- button: When press button alone, macro function -2 works; when press , processing speed decreases. Macro-3/Spindle+ button: When press button alone, macro function -3 works; when press , spindle speed increases. Macro-4/Spindle- button: When press button alone, macro function -4 works; when press , spindle speed decreases.
- Page 3 Step mode: 0.001: move unit is 0.001 0.01: move unit is 0.01 0.1: move unit is 0.1 1.0: move unit is 1.0 Continuous mode: 2%: 2 percent of max move speed 5%: 5 percent of max move speed 10%: 10 percent of max move speed 30%: 30 percent of max move speed 60%: 60 percent of max move speed 100%: 100 percent of max move speed...