Table of Contents
Advertisement
Getting to know your appliance
en
Control panel
Here you can see an overview of the control panel. The
design depends on the respective appliance model.
Explanatory notes
1
Selector for the oven gas burners (function selector)
2
Timer
3
Lamp button
4
Ignition button
5
Hotplate controls
Function selector
Turn the selector for the lower oven gas burner
anticlockwise to select the oven temperature.
Positions
"Off" position
ÿ
170-270
Temperature
range
Heat output of the lower oven burner: 3kW
Timer
Using the timer, you can set a time of up to 60 minutes.
The timer runs independently of the oven. It can be
used like a kitchen timer.
Setting
Zero position
û
End of the set cooking
S
time
Minute display
S
- 60
Setting procedure
Set the timer for the desired cooking time.
The time has elapsed
When the time has elapsed, a signal sounds. The
switch turns to the OFF position • automatically.
12
Function
The oven does not heat up.
Heat generated by the lower oven
burner in ºC for preparing cakes in
tins, pizza on a baking tray, baked
goods, etc.
Function
Setting off
Signal when the set time has
elapsed
Time display, in minutes.
Light button
This button switches on the oven light.
To switch it off, press the multi-function button again.
Ignition button
This button activates the electronic ignition system.
When you press the button, all igniters ignite at the
same time.
Burner knob
You can adjust the heat setting of the hotplates using
the four burner knobs.
The Positions
Zero position
þ
Settings area
—
˜
There is a limit stop at the end of the settings range.
Please do not turn the knob beyond this point.
The cooking compartment
The oven light is located in the cooking compartment.
Steam outlet
The hot air from the cooking compartment escapes at
the rear of the hob. Caution: do not cover the ventilation
slots. Otherwise the oven will overheat.
Function/gas oven
The hotplate is switched off.
Large flame = highest setting
Economy flame = lowest setting
Advertisement
Table of Contents
