MSR213U Simple Manual (MSR213U-33AUKBRFE1)
INSTALLATION
1) Insert USB connector to a free USB port on the
PC system.
2) The LED of MSR213U will turn blue indicating
that the device is ready for use.
READER TEST
MSR213U is the HID Keyboard emulation device to
work with the Windows XP/2000 and Win 7
applications that can accept the keyboard input. The
following process would help to identify MSR213U
installed properly or not.
1) Run the Notepad application from Start
Programs Accessories Notepad under
Windows XP/2000 and Win 7
2) Swipe any card through the reader MSR213U.
3) The card data should appear on the Notepad if
the MSR213U installed properly.
SPECIFICATIONS
Recording Method
Swipe Speed
Power Requirements
Operating Temperature
Operating Humidity
Magnetic Head Life
Dimensions
Weight
Connector
DATA OUTPUT FORMAT
HID & I Mode
Preamble
TK1 Prefix
TK2 Prefix
TK3 Prefix
M Mode
NOTICE: The issuer of this manual has made every effort to provide accurate information. The issuer should not be
held liable for any technical and editorial omission or errors made herein; nor for incidental consequential damages
resulting from the furnishing, performance or use of this material. This document contains proprietary information that
is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or
translated without the prior written consent of the issuer. The information provided in this manual is subject to change
without notice.
PM072-C10-S Revision A
Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA
5 to 55 inch/sec (worst case with +/- 15% jitter card)
+5VDC, +/-5%
-10C to +55C
5% to 95% relative humidity
Min. 1M swipes
Approx. 109L x 66W x 31H mm
Approx. 134g
USB type A connector
Card Data
TK1 Data
TK1 Suffix
TK2 Data
TK2 Suffix
TK3 Data
TK3 Suffix
TK1 Data
TK2 Data
TK3 Data
Postamble
2012-09-10
2