User Manual V1.5 Warning and Precaution ○ The operation temperature of Smart Thermal Detector is 10 - 40 ℃ (50 – 104 °F). Using this machine in the extreme environment may cause damage to the machine ○ When Smart Thermal Detector shows elevated temperature (Yellow or Red), adjust the position to measure again / use another thermometer to measure the temperature accurately.
1. Tap NFC card on the NFC Sensor if you would like to record detection with your detection (if applicable) 2. Move your head towards the Smart Thermal Detector until your face covered most area of the human-shaped frame of the detection area (around 50 cm distances between the forehead and the machine).
Wearing too many clothes / not enough clothes Measure result will be high/low Thermal Detector Setting Connect USB Mouse to the Smart Thermal Detector for detail settings of the software. Consult your IT Administrator before the setting Click the setting icon by moving the mouse cursor with your connected mouse.
Connecting to Wi-Fi network Smart Thermal Detector supports connecting to the internet with both Wi-Fi and LAN. Before using the Smart Thermal Detector, it is required to set the internet settings in the Android system. Connect the mouse to Smart Thermal Detector,...
Smart Thermal Detector User Manual V1.5 CMS Cloud control system Smart Thermal Detector can upload the information to the Cloud CMS system. Log-in to the CMS system Go to http://admin.hs-cms.net/login.html Use the Account and password provided by the supplier to log-in to the CMS system.
Smart Thermal Detector User Manual V1.5 Local Record Exporting Local record exporting is possible if Smart Thermal Detector is unable to connect to the internet Insert USB storage device into the USB port of Smart Thermal Detector Press export record icon Select the date for export and USB folder for exporting, then click “Export”...