Advertisement
Quick Links
TVD-CB5A Cup Base Installation
Instructions
Specifications
Dimensions:
Weight:
382 g (13.47 oz.)
Accessories:
Rubber ring: 1 pcs
Used to prevent moisture from entering between the dome
camera and the cup base.
Supported devices:
•
TVD-5404
•
TVD-5405
•
TVD-5406
P/N 1073446-EN • REV C • ISS 28JUL21
•
TVD-5407
•
TVD-5408
Installing a TVD-CB5A cup
base to a dome camera
When assembling a TVD-CB5A cup base to a
dome camera, you require:
•
TVD-CB5A cup base
•
Rubber ring
Note: You will need to remove the dome
back box from the dome camera. It is not
required when installing in a cup base.
To mount a TVD-CB5A cup base to a
dome camera:
1.
Screw the cup base onto the swan
neck or pendant mount and fasten
with the locking screw (pendant
mount shown as an example below).
2.
Remove the back box from the
dome camera. It is not required
when installing in a cup base.
1 / 2
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for TruVision TVD-CB5A
- Page 1 TVD-5407 • TVD-5408 Dimensions: Installing a TVD-CB5A cup base to a dome camera When assembling a TVD-CB5A cup base to a dome camera, you require: • TVD-CB5A cup base • Rubber ring Note: You will need to remove the dome Weight: 382 g (13.47 oz.)
- Page 2 The manuals are available in assembly to the cup base. several languages. Refer to the TruVision swan neck or pendant mount installation manual for instructions on installing a mount to the dome camera (swan neck assembly shown).
Need help?
Do you have a question about the TVD-CB5A and is the answer not in the manual?
Questions and answers