1. Manuals
  2. Brands
  3. Homeguard Manuals
  4. Security System
  5. MS8000
  6. Manual

Homeguard MS8000 Manual

Security set with built-in telephone dialler
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

SECURITY SET WITH BUILT-IN TELEPHONE DIALLER
HOMEGUARD MS8000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS8000 and is the answer not in the manual?

Questions and answers

Related Manuals for Homeguard MS8000

Summary of Contents for Homeguard MS8000

  • Page 1 SECURITY SET WITH BUILT-IN TELEPHONE DIALLER HOMEGUARD MS8000...

  • Page 2: Safety Precautions

    1. SAFETY PRECAUTIONS: be switched of (silent alarm) via the keyboard after entering your personal access code (PIN). a. Home Guard is designed for indoor use only. b. Use Home Guard only in dry places 4. Battery compartment: c. The supplied power adapter is designed for use Contains a back-up battery in case of a power failure for 230V only or tampering.

  • Page 3: Selecting A Suitable Location

    Indicator flashes if remote transmits a command. If d. The sensor should not be placed above or near indicator does not flash or lights up weakly, replace heating elements or in front of air-conditioners. the battery. HOMEGUARD MS8000...

  • Page 4: Programming Of Telephone Numbers

    e. Do not mount the sensor on a metal surface or firmation. The green indicator starts flashing. The numbers you chose should be have well next to electrical equipment such as TV sets or informed people, instructed by you and able to help computers.

  • Page 5: Delay Arm

    7. DELAY ARM you can change the factory default: The green indicator starts flashing. The alarm mode may be activated by either the 1. Enter your PIN (Personal Identification Number). 2. Press 5 on the keyboard of the Home Guard: HOMEGUARD MS8000...
  • Page 6 One low tone is given for confirmation. the remote control or keyboard. 2. Press DISARM to de-activate the Home Guard. 3. Enter a new 4-digit PIN code: You will get three To activate the security system from the key- If you use the remote, the arming and disarming high tones and one low tone as confirmation board (always delayed): may be instant of delayed, depending on the set-...

  • Page 7: Troubleshooting

    2. The base station does not react at all, the green instruction manual. indicator s not on: Check the power supply and/or the replace the Do not open the power supply or Home back-up battery. Guard. No serviceable parts inside! macman HOMEGUARD MS8000...

Table of Contents