The usual burn-in period is not required, because the speakers are artificially aged in-house. Please read the technical description and manual to take advantage of the capabilities of these speakers and ensure safe operation. musikelectronic geithain GmbH RL 941...
Technical data and appearances are subject to changes without notice. Errors and omissions excepted. Musikelectronic Geithain GmbH assumes no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein.
SYSTEM DESCRIPTION System description The RL 941 has been designed for both the professional user at medium-size to large audio, video and film studios and for the discerning music enthusiast. The directivity index has been optimized to listening distances between 2.5 and 4 metres. Low and middle frequencies are reproduced by a specially designed 8-inch cone loudspeaker.
; Clean only with dry or slightly moistened cloth. ; Protect the power cord from being walked on, pinched or damaged in any other way. Pay particular attention to plugs and the point where they exit the device. musikelectronic geithain GmbH RL 941...
Page 7
BASIC INFORMATION ; Do not attempt to service this product yourself as opening or removing cover may expose you to dangerous voltage or other hazards. ; Refer all servicing to qualified service personnel. musikelectronic geithain GmbH RL 941...
In case of damages report them to your retailer. Keep the packaging, in case the speaker has to be transported in the future. Delivery contents ; Speaker RL 941 ; Mains cable ; Technical description and user manual Cleaning The speaker is made of real wood veneer and needs to be nurtured in the same way as furnishings.
For optimum listening experience a minimum distance of 50 cm (19.7″) to walls and furniture should be ensured. Avoid corner installations because unwanted bass accentuation could arise. ; Minimum distance to wall b ≥ 50 cm (19.7″) musikelectronic geithain GmbH RL 941...
; Distance between speakers and your listening position a = 2.5 m … 4 m (8′2″ … 13′1″) ; Adjust the speaker horizontally to the height of the ear at the listening position musikelectronic geithain GmbH RL 941...
; Distance between speakers and your listening position a = 2.5 m … 4 m (8′2″ … 13′1″) In case installation in the prescribed way is not possible in your listening room most decoding devices allow adjustments of single speakers. musikelectronic geithain GmbH RL 941...
When using a signal source with unbalanced outputs (RCA) you need to balance the connecting cables. This avoids hum and other noise interferences. The table and the following figure show the wiring. Unbalanced RCA to balanced XLR Connections Loudspeaker (XLR-3M) Cable Source (RCA) musikelectronic geithain GmbH RL 941...
The two-coloured LED at the front of the speaker is used as status indicator of the device. ; LED green: indicates normal operation of the device ; LED red: indicates the operation of the overload protection circuit; Output power limitation to protect the components from overloading musikelectronic geithain GmbH RL 941...
398 mm × 254 mm × 345 mm (15.7″ × 10″ × 13.6″) Weight 18.6 kg (41.1 lbs) Design of the cabinet MDF wood in ash black veneered; different veneers and colours on request Lateral mounting with lateral mounting; without lateral mounting on request musikelectronic geithain GmbH RL 941...
ACOUSTIC MEASUREMENTS Acoustic measurements All acoustic measurements are carried out under anechoic conditions with 1 m (3′3″) distance. [dB] [Hz] FREE FIELD FREQUENCY RESPONSE 0° 45°h 80 100 [Hz] TOTAL HARMONIC DISTORTIONS P = 96 dB musikelectronic geithain GmbH RL 941...
Need help?
Do you have a question about the RL 941 and is the answer not in the manual?
Questions and answers