Table of Contents
Advertisement
Warning this is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
Safety Instructions for 3D display
Read and follow these instructions:
1. This product must be earthed.
2. The mains plug or appliance inlet is used as the disconnect device and
should be easily accessible.
3. Use only an approved power cord or interconnection cable.
4. Unplug the product if you are not going to use it for a long period of time.
5. Unplug the product if you need to clean it, use a slightly damp cloth. Never
use alcohol, solvents or ammonia-based liquids.
6. Refer all servicing to qualified service personnel
7. Do not block any ventilation holes.
8. To avoid electric shock, do not expose to rain or excessive moisture.
9. Do not store or use the product in locations exposed to excessive heat,
direct sunlight, extreme cold or in dusty environments.
10. Avoid moving the product between locations with large temperature
differences.
11. Choose a location within the following temperature and humidity ranges.
• Temperature: 0- 35°C
• Humidity : 20-80% RH
Avoid hitting or dropping during operation and transportation.
12.
adequate measures.
Advertisement
Table of Contents
