Polygroup Polytree MCP120652 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and perfect shape™ technology -Set up and light up your tree in less than 10 minutes! Carefully follow
the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Light String Plug
Extension Cord
Section 3
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the section 3 and remove protective
cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into
the stand.
5. Please remove protective cap from section 2 and section 1(tree top), continue inserting the section 2
into section 3 and the section 1 ( tree top ) into section 2, turning the poles and make sure the plug in
the pole is inserted into place .
6. Just plug the adaptor (connecting with the tree power cord) into the wall outlet (see Fig. B ), your
entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or
broken, loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order to
maintain the performance and life expectancy of your pre-lit tree.
7. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)
This is perfect shape™ tree, just slightly upsweep all branch tips for a uniform look. Shift branches to fill
any gaps. Your Christmas tree is now complete and ready to be decorated.
Fig. C
Top view
MODEL #: MCP120652,MCP120652M
Polytree®!
Section 1
S90
S45
Section 2
S90
S90
Side view
This tree assmebles with Quick Set®
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
*Electrical Rating Of Power Adaptor
(For Indoor Use Only)
Input:100-240VAC, 50/60Hz, 0.5A Max.
Output: 9V DC 0.7A
Do Not Tamper
Internal Parts
Remove the
protective cap
Do Not Tamper
Internal Parts
Remove the
protective cap
Power Cord
Adaptor
To Be Plugged
Into Wall
Outlet