Page 1
Meet your new Lloyd Pascal Floor Storage Unit Customer Helpline If you need help or have damaged or missing parts, call our customer helpline 0121 776 5720 Assembly instructions- Please keep for future reference- 260.94.168M GREY 260.96.168M WHITE Issue 2 - 13/07/20...
Page 2
Welcome to We would love to see your new product in its new home. Share your experience by taking a picture the Lloyd of your new LP product and post it on social media tagging Pascal family #welovehome #Lloydpascal #LPfurniture #LPhome established Connect with Us: Using your in 1919...
Safety and Care Advice IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. • Keep children and animals away • Assemble the item as close to its • We do not from the work area, small parts final position (in the same room) as recommend the use could choke if swallowed.
Page 4
Fittings NOTE: The quantities below are the correct amount to complete the assembly. In some cases Bag 1 8x30mm Dowel x10 6x30mm Dowel x2 Glue x1 Male Camlock x12 25mm Sticker x6 Push catch x2 3x16mm Screw x4 Female Camlock x12 6x35mm Bolt x4 4x32mm x6 IT Screw x2...
Tools required Phillips Screwdriver Drill (small and medium) Eye protection (when using glue) Drill Bit #welovehome...
Page 6
Panels Rail x1 (26.8cm x5cm) Right side panel x1 (77cm Left side panel x1 (77cm x21.8cm) x21.8cm) Back panel x1 (77.7cm Top panel x1 (30cm x24cm) Bottom panel x1 (21.9cm x27.5cm) x30cm) Door x1 (29.7cm x 61cm) Leg x4 (3cm x 6cm) Drawer back panel x1 (9.5cm x21.7cm) Drawer right side panel x1...
Page 14
IT Screw x2 Hinge x2 4.5x15mm Screw x4 Female Camlock x2 Glue x1 Note: Use a screwdriver to turn the female camlock clockwise to lock. #welovehome...
Page 15
25mm Sticker x6 Shelf support x4 Note: You can adjust the shelves to your preference #welovehome...
Page 18
Wall plug x1 Wall strap x1 4x32mm x1 1.5tx 18mm Washer x1 WARNING! IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED WALL Note: To hide the strap behind the unit, drill the hole lower than the top of the unit.
A Guide to Wall Mounting & Fixings Important note: Important: when drilling into walls always check that there are no hidden wires or pipes etc. If plastic wall plugs (rawl plugs) Make sure that the screws and wall plugs being used are suitable for are supplied with your product, supporting your unit.
Using camlocks Step 1 Step 3 Connect the male Push the male camlock camlock as directed in into every hole. the assembly instructions using a screwdriver. Step 2 Step 4 Insert the female Turn the female camlock camlock as shown in the with a screwdriver.