Related Manuals for SHOWTEC LED Operator 6 V2
Summary of Contents for SHOWTEC LED Operator 6 V2
- Page 1 MANUAL ENGLISH LED Operator 6 Ordercode: 50728 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
LED Operator 6 Table of contents Warning ................................... 2 Unpacking Instructions ............................. 2 Safety Instructions ..............................2 Operating Determinations ............................3 Connection with the mains ............................. 4 Return Procedure ..............................4 Claims ..................................4 ... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec LED Operator 6 DC power adapter (1,5 m) ... -
Page 4: Operating Determinations
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service. -
Page 5: Connection With The Mains
LED Operator 6 Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER... -
Page 6: Description Of The Device
LED Operator 6 Description of the device Features The Showtec LED Operator 6 is a compact light controller equipped with very useful features: • Power supply: 12V DC 500mA • Power consumption: 20W • 6 x 6 channel fixtures control •... -
Page 7: Frontside
LED Operator 6 Frontside Fig. 02 01) Fixture buttons (1-6) 02) Color Fade button 03) Color Macro button 04) Red button 05) Green button 06) Blue button 07) Amber button 08) White button 09) UV button 10) Sound sensitivity control 11) Sound button 12) Strobe button 13) Blackout button... -
Page 8: Backside
LED Operator 6 Backside Fig. 03 26) Power switch ON/OFF 27) Power adapter 12VDC 500mA input 28) 3-pin DMX signal connector OUT Installation Remove all packing materials from the LED Operator 6. Check if all foam and plastic padding is removed. -
Page 9: Data Cabling
LED Operator 6 Data Cabling To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference. -
Page 10: Color Presets
LED Operator 6 1. Color Presets The 18 preset color buttons (24) (Orange, Yellow, Magenta, Cyan, Purple, Full on White, Amber, Peach, Sunflower, Salmon, Lime, Warm White, Sea Foam, Light blue, UV Green, UV Blue, UV Red, UV White) can be used to assign a color to each addressed fixture. -
Page 11: Auto Mode
LED Operator 6 3. Auto Mode This mode uses built-in programs to make the fixtures randomly change colors. The color switch on all fixtures takes place independtly. 01) Select one or more fixtures by pressing the 6 Fixture buttons (01). 02) Press the Auto button (22) until the LED indicator lights up. -
Page 12: Sound-Override
LED Operator 6 7. Sound-Override This feature will work in Auto Fade, Auto, Chase, and RGB Offset mode and it creates a sound-controlled show, using the selected auto mode. Sound-Override can be triggered by using the microphone instead of the Speed Time fader (19), used for other multi-step modes: 01) Press the Sound button (11) until the LED indicator lights up. -
Page 13: Maintenance
01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LED Operator 6. Return the LED Operator 6 to your Showtec dealer. 03) A LED effect does not respond to the LED Operator 6: Check the DMX address of the fixture and the controller. -
Page 14: Product Specifications
Grey metal & flame-retardant plastic Connections: Power adapter & DMX data connector Max. ambient temperature t 40°C Minimum distance: Minimum distance to lighted object: Design and product specifications are subject to change without prior notice. Website: www.Showtec.info Email: service@highlite.nl Ordercode: 50728... -
Page 15: Dimensions
LED Operator 6 Dimensions Ordercode: 50728... - Page 16 ©2017 Showtec...
Need help?
Do you have a question about the LED Operator 6 V2 and is the answer not in the manual?
Questions and answers