Advertisement
Quick Links
Button Modes & Resets
Feed Mode
The Nero® will spin very slowly for 10 minutes (default setting) and then resume it's set mode.
To Enter Feed Mode:
1. Hold the button on the Controller for 2-5 seconds until the LED blinks white. The button LED will
continue to blink white while in feed mode.
All Off
All connected Nero® pumps will stop.
To Power Off:
1. Hold the button on the Controller for 6+ seconds until the LED fades out. The button LED will pulse
white while pumps are off.
To resume:
1. Press the button once.
Soft Reset
A soft reset restarts the device but retains the schedule and settings.
To Perform a Soft Reset:
1.
Unplug from power.
2.
Reapply power.
Nero
Quick Start Guide
®
Advertisement
Summary of Contents for AI Nero NX7
- Page 1 Button Modes & Resets Feed Mode The Nero® will spin very slowly for 10 minutes (default setting) and then resume it’s set mode. To Enter Feed Mode: 1. Hold the button on the Controller for 2-5 seconds until the LED blinks white. The button LED will continue to blink white while in feed mode.
- Page 2 Copyright © Aperture Pet and Life LLC, AquaIllumination, myAI and the AI logo are registered trademarks of Aperture Pet and Life LLC. Blade is a trademark of Aperture Pet and Life LLC. All rights reserved. Apple and the Apple logo are trademarks of Apple, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Need help?
Do you have a question about the Nero NX7 and is the answer not in the manual?
Questions and answers