Table of Contents
Advertisement
Step 1 & 2: Remove 6 screws from the rear panel.
Step 3: Disconnect the connector (CN507) to detach the rear panel.
Step 4: Remove 4 screws from the rear panel.
Step 5: Lay the rear panel and remove the Fan Unit as arrow shown.
7.2.6. Disassembly and checking of the AC Inlet P.C.B. and Amplifier P.C.B.
Follow Step (1) to Step (5) described in section 7.2.4.
Follow Step (1) to Step (3) described in section 7.2.5.
15
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Advertisement
Table of Contents
