Summary of Contents for DQ HEATING Jango
- Page 1 Fixing Instructions Jango Towel Rail Please unpack your delivery carefully and inspect the radiator and contents – any damages or shortages must be notified to your supplier within 3 days of delivery of your goods.
-
Page 2: Technical Information
Specifications Technical Information P/ V Standard connections: ½” F = Flow R = Return P = Plug V = Vent Wall to front face = 150-185mm Wall to pipe centre = 80-115mm Technical Specifications Materials: Stainless Steel Connections: ½” Flow and Return H80 –... -
Page 3: Important Note
Wall Mounting Wall M Screw (x4) Content list & Tools required Wall Plug (x4) Review instructions carefully before installation. Installation should be completed by a suitably qualified person. TOOLS REQUIRED FOR INSTA Please dispose of packaging in a responsible manner. TOOLS REQUIRED FOR INSTA &... - Page 4 User Manual CAUTION: To avoid overheating, do not cover the heating appliance. CAUTION: Hot surface. THESE INSTRUCTIONS SHOULD BE READ CAREFULLY, AND RETAINED FOR FUTURE REFERENCE. DO NOT CONNECT THE RADIATOR TO NETWORK BEFORE HAVING READ AND UNDERSTAND THE FOLLOWING INSTRUCTIONS. Radiator must be installed only by expert technicians and installation must be compliant with all applicable rules, and national safety regulations and laws in force in the country where the product is installed.
- Page 5 User Manual • Do not empty the water in your radiators throughout summer or during a renovation when they are not in use for a long period. In this case turn of the inlet and outlet valves so that the water does not drain. If radiators are left dry for a long time corrosion can occur.
-
Page 6: After Sales Services
User Manual * CLOSED HEATING SYSTEM: It is a system that water circulates in a closed loop water installation (including the radiator and the towel heater) without exposure to the atmospheric effects. sture-free, effects through open expansion tanks. Open expansion ** OPEN HEATING SYSTEM: It is a system that water circulates in the installation (including the radiator and the tanks are used in order to balance the increasing ments. -
Page 7: Installation Instructions
SPECIAL CASES STEP LADDER ALLEN KEY METRIC RULER HAMMER Mounting elements, Decorative (FOR HIGH PRODUCTS) www.hammamradiator.com.tr Cap (A) and Blind Plug (B) are Adjust the height of your radiator by Drill holes (Ø 10 mm) into the spots Place your radiator into the wall not included in the installation set for Spin, Step, Eye, Mixology using a metric ruler. -
Page 8: Terms And Conditions
Terms and Conditions You must immediately remove all packaging, inspect the goods and notify us of any damage to the goods within 3 days of delivery. We shall have no obligation to replace or repair damaged goods in the event of failure by the Buyer to comply with this provision.
Need help?
Do you have a question about the Jango and is the answer not in the manual?
Questions and answers