Contents Product Specifications 1. Introduction (TFT LCD Display) 2. General Information 1. Product Name 3. Legal Details 2. Suppliers 4. Local Regulations 3. Electrical Parameters 5. Intended Use 4. Dimensions & Material 6. Before the First Ride 5. Features 7. Before Every Ride 6.
1. Introduction Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike designed in Australian and compliant to Australian standards (EN15194). Safety instructions. Please familiarize yourself with this manual.
2. General Information 1. Introduction Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. 13. Handlepost 1. Wheel 14. Handlebar 2. Cassette The Commuter eBike is compliant to Australian standards (EN15194).
3. Legal Details Declaration of Conformity 3. Legal Details This user manual complies with the requirements of EN 15194 and Machinery Directive Brakes EC/2006/42. See the separate Declaration of Conformity insert. Component lbf.in Newton Meters (Nm) kgf.cm Edition 2 Rev 2, October 2018 Brake Lever (Flat Bar) 53-60 6-6.8...
5. Intended Use Built for Commuters, not Stuntmen This bicycle is only designed for one person riding with both wheels in contact with the ground. They are not intended for racing, jumps, hops, wheelies or anything of the kind. The manufacturer and dealer are not liable for any direct or consequential damages.
6. Before the First Ride Hit the Books before You Ride Spend some time to understand how to operate and use your new bike before hitting the road by reading through this manual thoroughly. Please Check Electrical system Make sure you are familiar with the function of all the controller buttons and meaning of the displays. Please consult the information in the relevant section from the manual.
Page 9
Brakes Test your Brakes by standing next to your bike, pull both Brakes, and rock the Bike back and forth. (A) The Bike should not roll and the Brake Pads should remain firmly in place. Does your bike feel solid? If you feel a clunk with each forward or backward movement of the bike, you probably have a loose Headset so please tighten it.
Page 10
Gears Brakes Test ride in a safe area away from traffic to familiarize yourself with the function of the Gear Shifters and how to upshift and downshift. Check that indexing (shifting from gear to gear) is crisp and that you are able to shift into the lowest and highest Component lbf.in Newton Meters (Nm)
Page 11
Check that your Saddle and Handlebar are at the correct height Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. and that you can reach Brake and Gear Levers comfortably.
Page 12
When riding, your hips should remain stationary and your knee should only bend about 20-25° when the pedal is all the way down. The Saddle should be roughly parallel to the ground, but if it’s not comfortable, tip the Nose down to relieve pressure on the crotch or up to distribute your weight over a greater area of the Saddle.
1. Introduction 7. Before Every Ride Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. Be sure to check the following before every ride: Electrical System Check that the battery is seated properly in the carrier on the frame and fully plugged in.
Page 14
ABC Quick Drop Test Brakes We design our bikes so that they can be everyday companions. For safety, however, we recommend this test before each ride: Component lbf.in Newton Meters (Nm) kgf.cm Brake Lever (Flat Bar) 53-60 6-6.8 61-69 QUICK DROP Brake Lever (Drop Bar) 55-80...
Page 15
Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. A worn or damaged Rim may fail without warning and cause the rider to crash.
8. Safe Riding Brakes Component lbf.in Newton Meters (Nm) kgf.cm Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Keep Your Eyes on the Road Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Check for potholes and other dangers, like car doors opening and Disc Rotor to Hub (M5 bolts) 18-35 21-40...
Page 17
Using Brakes Go with the flow Braking distances increase in wet weather or under heavy load, so brake more gently and earlier under those circumstances. Gradual Braking To prevent skidding when slowing or stopping your bike, pull Brakes gradually. Skidding does not slow you down faster and means you can’t steer well so it should be avoided.
Page 18
Charging Brakes Your Commuter comes with battery charger specific to your bike Specific charging methods refer to: Component lbf.in Newton Meters (Nm) kgf.cm Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Off-Bike Charging • Insert the charging plug of recharger into the battery charge hole; pay attention to the plug direction, please do not insert or dismantle...
Page 19
If you’re going to stop using the bike for more than a month, charge the Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike.
Page 20
Batteries must not be disposed of in landfills or by incineration Component lbf.in Newton Meters (Nm) kgf.cm When your Commuter’s battery has reached the end of its service life, it should be treated as hazardous waste material and should Free Hub Body 305-434 34.5-49 352-499 not be disposed of in normal household trash.
When the controller is on, the power assist will be applied immediately when you step on the Pedal. It is, therefore, recommended to mount your Commuter with the controller off. After you are seated, make sure no weight is on the pedals to prevent accidental movement, then turn on the controller.
Page 22
Riding without Power Assistance Component lbf.in Newton Meters (Nm) kgf.cm Your Commuter is designed to be ridden normally like a conventional bike if the power assist is turned off. If you are going downhill or Brake Lever (Flat Bar) 53-60 6-6.8 61-69 want to extend your range you can turn off the assistance but keep the display on to watch your speed.
11. Service Your Commuter has many advanced parts and components. Many bicycle service and repair tasks require special knowledge and tools. Do not begin any adjustments or service on your bicycle unless you are able to properly complete them. Improper adjustment or service may result in damage to the bicycle or cause serious injury.
Page 24
Brakes Make sure the Brakes are working with proper stopping power. The Levers should stop short of touching the Handlebar. Riding with improperly adjusted or worn Brakes is dangerous and can result in injury or death. Check the Brake manufacturer’s instructions for care and operation of your Brakes. Keep Brake surfaces clean and free from oil or lubricants. Replace worn Brakes with authorized replacements.
Page 25
If you are not sure if the chain slack is from chain wear or wheel misadjustment, take your bike to the dealer for servicing. Do not clean your Commuter using a pressurized spray or steam because water can be forced into sealed areas and...
Page 26
Quick Releases The Quick Release uses over-center cam action to clamp the component in place and allows for easy, tool-less removal. A Quick Release has a Clamp (1), an Acorn (2) and a Lever (3). The concave side closes inward. The Acorn allows you to adjust the clamping force.
Quick Release and Fasteners Check that quick releases and important nuts and bolts that keep your wheels, handlebar and seatpost in place are properly closed and adequately tightened. Correct tightening force is vital. Too little force and the fastener may not hold securely. Too much force and the fastener can strip threads, stretch, deform or break.
Page 28
Brakes Component lbf.in Newton Meters (Nm) kgf.cm Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount 55-70 6.2-7.9 63-81 Wheels Component lbf.in Newton Meters (Nm) kgf.cm Free Hub Body 305-434...
5. Features • Suitable for low temperature, Max -20°C. Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. • High-contrast 3.5inch IPS colorful matrix screen. • Ergonomic external button design, easy to operate.
Brakes 6. TFT screen instructions Component lbf.in Newton Meters (Nm) kgf.cm Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 BATTERY CLOCK Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount 55-70 6.2-7.9 63-81 BRAKE SIGNAL FRONT LIGHT Wheels...
Page 33
1. Introduction 7. Functional description Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. The Commuter eBike is compliant to Australian standards (EN15194). Items in carton: When you open the carton, please check if the following items are inside. If not, please contact with your agent.
Page 34
Brakes 7.3 Speed & Mileage mode switch Component lbf.in Newton Meters (Nm) kgf.cm Short press MENU button can change the speed and mileage mode, Brake Lever (Flat Bar) 53-60 6-6.8 61-69 TRIP→ODO→RANGE→TRIP→TIME→MAX SPEED→AVG SPEED Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35...
Page 35
Press and hold UP button for 1 second can turn on/off the headlight, and the scree will switch to the corresponding mode. Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike.
Page 36
Brakes 7.5 Walking mode (6km) Component lbf.in Newton Meters (Nm) kgf.cm Press DOWN button → 0-level → walk-level→press and hold DOWN button → flash, the bike get into walking mode, Brake Lever (Flat Bar) 53-60 6-6.8 61-69 out of the mode when release the button. Brake Lever (Drop Bar) 55-80 6.2-9...
Double press MENU button (press interval less than 0.3 second) can get into setting menus, press UP/DOWN buttons to Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike.
Page 38
Brakes 8.1 Language 8.2 System Component lbf.in Newton Meters (Nm) kgf.cm Default EN, Un adjustable Press UP/DOWN button to switch between Metric / Imperial. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount...
Page 39
Press UP/DOWN button to change the brightness of the backlight, ׀is darkness ׀׀׀׀׀is brightness, default value is .׀׀׀׀׀ Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike.
Page 40
Brakes 8.4 Auto off 8.5 Temp Component lbf.in Newton Meters (Nm) kgf.cm Hide only. Press UP/DOWN button to change the auto power off time, from 1 to 9/OFF, the number Brake Lever (Flat Bar) 53-60 6-6.8 61-69 represent minutes to shutdown, OFF means disable auto off function, default value is 5 Brake Lever (Drop Bar) 55-80 6.2-9...
Page 41
Press UP/DOWN button to change the battery indicator, Voltage / Percentage / OFF. Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. The Commuter eBike is compliant to Australian standards (EN15194).
Page 42
Brakes 8.7 Pow Ind Component lbf.in Newton Meters (Nm) kgf.cm Press UP/DOWN button to change the Power indicator, Power/Current. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 * This data represent power output of the battery (not motor). Disc Rotor to Hub (M5 bolts) 18-35 21-40...
Page 43
Clock setting, press MENU button get into the clock setting menu, press UP/DOWN button to set Year/Month/Day/Hour/Min/Sec/Clock(show or hide). Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. NOTE: There is a rechargeable battery inside display, it keeps the The Commuter eBike is compliant to Australian standards (EN15194).
Page 44
Brakes 8.9 Start password Component lbf.in Newton Meters (Nm) kgf.cm Currently the controller does not support and cannot be set. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Basic Setting Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount...
Page 45
Displays the wheel diameter value transmitted Displays the battery voltage value transmitted by Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. by the controller (this needs controller support).
Page 46
Brakes 8.12 USB Port Component lbf.in Newton Meters (Nm) kgf.cm Press UP/DOWN button, select press OFF/ON. Will be no Voltage/Current output after switching off. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount...
Page 47
Light sensor item, press MENU button, enter into light sensor interface, press UP/DOWN button select OFF/ON, Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. select Sensitivity, press UP/Down, select sensitivity of light sensation HI/MID/LO The Commuter eBike is compliant to Australian standards (EN15194).
Page 48
Brakes 8.14 Advance setting Component lbf.in Newton Meters (Nm) kgf.cm Press MENU button can get into the advance setting menu, default password is ‘1919’. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount...
Page 49
Display the speed limit value transmitted by the controller. Display the calorie value. Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. 8.16 Current limit 8.20 Mainten Display the current limit value transmitted by the controller.
Page 50
Brakes 8.22 Bike mode 8.23 Boost Component lbf.in Newton Meters (Nm) kgf.cm Press UP/DOWN button, select press ECO/SPORT mode. Press UP/DOWN button, select press N/Y mode. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35 21-40...
Page 51
Press MENU button enter Restore Factory settings item, set YES will restore all parameter to factory settings. Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. The Commuter eBike is compliant to Australian standards (EN15194).
Brakes 8.26 Product info Component lbf.in Newton Meters (Nm) kgf.cm Get into this item can show hardware version software version. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92 Disc Rotor to Hub (M5 bolts) 18-35 21-40 Caliper Mount...
9. Error Code define 860C can show warning message, icon shows on the screen, and show error code at the bottom of the screen, error code from 04~n, definition see the table below. Error Code Error description Error display Throttle error Display 04 on LOGO position Throttle on high position Display 05 on LOGO position...
Brakes 10. Assembly instructions Component lbf.in Newton Meters (Nm) kgf.cm Please pay attention to the screw’s torque value, damaged caused by excessive torque is not within the scope of the warranty. Brake Lever (Flat Bar) 53-60 6-6.8 61-69 Brake Lever (Drop Bar) 55-80 6.2-9 63-92...
Assist level can be customized, the highest level is 9, and Thank you for choosing an Ignite e-Bike. This manual has been designed to help get a better understanding of you Commuter eBike. by excessive torque is not within the scope of the warranty.