Advertisement
Connections, signals, signal descriptions
INPUT: BNC
Analog signal of 0-8V amplitude applied to this connector is amplified with
100:1 factor and delivered to the high voltage output of QBX-08 Pockels
cell driver.
Input impedance is 50 Ohm.
24VDC/INTERFACE: D-SUB 9 PIN, FEMALE
PIN (color)
1, 2 (black)
3, 4 (red)
5
6
7
8
9
DESIGNATION
+24VDC power supply to be connected
24VDC RETURN
here. Power consumption 1.5A max.
We recommend to use +24VDC power
+24VDC
supply with isolated output and non-
grounded return.
N/C
-
5V TTL signal to be applied here to enable
Enable
the high voltage output.
Enable signal could be used instead of
Enable switch and they shouldn't be used at
the same time.
Enable return
Ready
Exactly as Ready LED, indicates the
Pockels cell driver is enabled and ready to
work.
Ready return
DESCRIPTION
Advertisement
