Adjusting The Volume; Demonstrating Alerts; Muting Alerts - Radio Shack SWS VG-2 Guard Owner's Manual

ADJUSTING THE VOLUME

To adjust the detector's volume, hold down
ume reaches the desired level, 1–4 (1 is the lowest level).

DEMONSTRATING ALERTS

To familiarize yourself with the different alerts your detector
sounds, you can run a demonstration. To start the demonstra-
tion, press and release
the detector turned on. The detector demonstrates the alerts
for X, K, Ka, safety warning, laser, and VG-2 (if selected), in
that order. These audible and visual alerts sound and display.
Alert Type
X High trill
K Low steady
Ka Medium warble
Safety Low ascending/descending
Laser High-low
VG-2 4-tone ascending
To stop the demonstration, press

MUTING ALERTS

While a radar, laser, or safety warning alert is sounding, you
can press
MUTE
rent alert and any new alert that it receives within 20 seconds.
Visual alerts are not affected.
12
and
MUTE
Audible Alert
to temporarily silence the detector for the cur-
PWR
at the same time with
CITY
Visual Alert
3
and yellow LED
5
and red LED
7
and yellow/red LEDs
S.
and red LED
L
–
.
PWR
until the vol-