Table of Contents
Advertisement
4.
Articulating Back
5.
Footplate Height Adjustment
and Removal
To adjust the
height of the
footplate the
index plunger
pins on both
sides need to be
pulled out and the
footplate can be
positioned higher
or lower in line
with the next set
of holes.
6.
Footplate Angle Adjustment
The angle of the footplate can be
adjusted using the chromed dome
bolts highlighted. It is possible to
adjust the angle from -10 degrees to
+ 20 degrees
There are two knobs on
the back of the chair
which allow the carer
to change the angle of
the upper part of the
backrest to give more
head support or allow
for a kyphotic curvature
of the spine.
Footplate removal requires two hands to
pull each of the index plungers out and
then slide the footplate off the leg rest
t: 01685 845900
mechanism.
Advertisement
Table of Contents
