Advertisement
Quick Links
Before starting with the driver installation, please make sure
that the tablet is not connected to your PC.
◎ Windows Version
1. Insert the Driver CD into your CD drive and wait until the
auto start window appears. On Windows Vista and Windows 7
you may confirm the action by pressing [Continue] if the User
Access Control window appear.
2. Simply follow the steps on the screen and finish the installation
with rebooting your system.
◎ Mac Version
1. Insert the Driver CD into your CD drive and wait until the Drive
is loaded.
2. Click on the Tablet con and simply follow the steps on the
screen and finish the installation with restarting your system.
Note: You have to remove the exiting pen tablet driver before installing
the driver (including the tablet driver with other brands.)
Driver Installation
1
Advertisement
Related Manuals for Penpower TOOYA Master
Summary of Contents for Penpower TOOYA Master
- Page 1 Driver Installation Before starting with the driver installation, please make sure that the tablet is not connected to your PC. ◎ Windows Version 1. Insert the Driver CD into your CD drive and wait until the auto start window appears. On Windows Vista and Windows 7 you may confirm the action by pressing [Continue] if the User Access Control window appear.
-
Page 2: Knowing Your Tablet
Knowing Your Tablet 1. USB connector: Please connect the USB cable here. 2. LED indicator: The LED light on the tablet is the main indicator for hardware operation. This LED normally stays off, and will only turn it on or off in response to various conditions. If the LED of tablet is blinking continuously, it means that the USB port of your PC has a bad connection or power is not stable. - Page 3 4. Working area: The area for you to draw. Knowing Your Pen The pen of TOOYA Master Tablet is the connection between your hand and the graphic tablet. Just use and hold the pen like a normal pen. If you move over the tablet in max 10mm distance without touching it you can see the movement of the pointer.
- Page 4 ◎ How to change the pen tip If the tip is not soft any more or leaves scratches (scratch noise) on the graphic tablet it’s recommend to exchange the tip to avoid any damage on your tablet. 1. Use the pen tip remover tool like a classical tool you know from home.
-
Page 5: Control Panel
Control Panel This paragraph describes the Windows control panel but can be adopt to Mac control panel as well. After driver installation, restart and successful connection of your Graphic tablet you will find a small Tablet Icon in the quick start bar close to your clock. Click on the Icon to open the Control Panel. - Page 6 2. Button: You may re-program the functions of the pen tip and the two-barrel buttons by selecting the button’s name. A c c o r d i n g t o t h e m o u s e function, you can select no action, left click, left double click, middle click, middle double click, right click, or...
- Page 7 4. Scope: I. Full Area: Select the largest possibly working area. II. Screen Ratio: Set the tablet area as same as the screen size by reducing either the current width or height of the Pen area. III. Reserve Edges: Allocate the space for the tablet’s hot cells.
Need help?
Do you have a question about the TOOYA Master and is the answer not in the manual?
Questions and answers