Page 2
The phono stage takes a few hours to warm up Unpacking properly from switch on. The Discovery 1 phono stage is supplied with the Because it consumes very little power we suggest following items: - leaving it permanently powered up (unless you are going on Holiday).
Page 3
Hi-Fi installation is preferable. Front Panel Adjustments Connect the earth The Discovery 1 phono stage has 2 front panel Connect the tonearm earth wire (if it has an earth controls which make adjustments to suit a wide wire) to the binding post on the rear panel. It can variety cartridges.
Page 4
Troubleshooting value which does not match any of those available on the Discovery 1 it’s recommended to start with No Sound is produced the closest setting to the recommended value and If the blue LED on the left of the front panel is not then experiment away from that value;...
Need help?
Do you have a question about the Discovery 1 and is the answer not in the manual?
Questions and answers