Advertisement
STEP 3 - Insert one of the 1" screws through a flat
washer and then through the cabinet wall at one of
the hole locations.
STEP 4 - Place the flat washer and star washer on
the screw section protruding outside of the cabinet.
Thread the hanging clip into the screw and secure.
STEP 5 - Repeat for the other three lifting eye nuts.
Cabinet
Important: The unit must be isolated carefully to
prevent sound transmission. Field supplied vibra-
tion isolators are recommended.
STEP 7 - Install an auxiliary drain pan under the
horizontal condensing furnace to prevent possible
damage to ceilings.
1. Isolate the auxiliary drain pan from the unit and
from the structure.
2. Connect the auxiliary drain pan to a separate
drain line and terminate according to local
codes.
INSTALLER'S GUIDE
Field Supplied
Isolators
Auxiliary Drain
Pan
Page 3
Advertisement
