Advertisement
Quick Links
Fast Mover Tools
FMT6800 SERIES
Additional Information
The FMT6800 series should provide years of trouble free service,
however, to ensure maximum benefit from your machine it should be
treated with care, kept dry, cleaned, and electrically tested on a regular
basis. Any worn or damaged parts should be replaced immediately. To
assist we have provided a list of the main spares available to order.
All parts may be ordered through your local distributor.
Part No.
Description
415790
LAMP REFLECTOR
415795
END REFLECTOR
991511
GUARD
410059
ON/OFF SWITCH
64241072
1KW 220/240V GOLD POWERSLIM QUARTZ LAMP
64121033
1kW 110/120V POWERSLIM QUARTZ LAMP
410061
TIMER PLUG
The full range of Infrared products can be found on
www.fastmovertoolsuk.com
This product conforms to EU Directive 2002/96/EC.
This appliance bears the symbol of the crossed waste bin. This
indicates that, at the end of its useful life, it must not be disposed
of as domestic waste, but must be taken to a collection center for
waste electrical and electronic equipment. It is the user's
responsibility to dispose of this appliance through the
appropriate channels at the end of its useful life. Failure to do so
may incur the penalties established by laws governing waste
disposal.
FMT6800 SERIES
Hand Held & Static Short wave
Paint Drying Systems
The HLP1000 Series consists of the following models.
FMT6800 - Hand Held Heater/Dryer
FMT6800S - Hand Held Heater/Dryer + 5Part Stand
FMT6800T - 2 x Hand Held Heater/Dryers + 5Part Stand
FMT6900-TIMER- 0/60Min Timer for HLP1000S/HLP1000T models
Fast Mover Tools Ltd
Unit 1, Frenchs Avenue
Dunstable, Bedfordshire, LU6 1BH, UK
Tel: +44 (0) 1582 661993
Fax: +44 (0) 1582 667100
www.fastmovertoolsuk.com
Email - sales@fastmovertoolsuk.com
only
Advertisement
Related Manuals for Fast Mover FMT6800 Series
Summary of Contents for Fast Mover FMT6800 Series
- Page 1 Fast Mover Tools FMT6800 SERIES Additional Information The FMT6800 series should provide years of trouble free service, FMT6800 SERIES however, to ensure maximum benefit from your machine it should be treated with care, kept dry, cleaned, and electrically tested on a regular basis.
- Page 2 IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR YOUR SOCKET OUTLET USER INFORMATION THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND This model has been designed and developed to assist with any number of DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK small drying processes, and is ideal for spot repairs, engine drying, adhesive IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET stripe removal, drying filler, primer, or just preheating prior to spraying.