AIR250 Instruction Manual IMPORTANT Please read through this Manual carefully before using the AIR250. This tool must only be used for waterbased paint drying and within the parameters outlined in this manual. All users of the equipment should be trained in any risks associated with the products they are drying or using as drying aids.
Page 3
Check that the compressor that you are using is capable of providing the air required. Positioning the air blow guns too close to the workpiece will disturb the paint and cause effects that resemble silicone contamination. Fast Mover Tools T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com www.fastmovertoolsuk.com...
Make sure that your airline is free from water at all times. Fig. 2 If properly positioned and setup a single AIR250 will be able to dry an entire side of a medium sized vehicle. The guns can be operated independently to carry out work on small areas.
Attach Air Guns, Regulators and fit airline. Check all parts are safe and secure and them connect air supply have ensured that the Air Gun Regulators are in the off position. Fast Mover Tools T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com...
- Air supply line is not used with a properly working air filter. - A warranty claim will not be accepted without an official proof of purchase from your supplier. Fast Mover Tools T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com...
Page 7
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE Fast Mover Tools T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com www.fastmovertoolsuk.com...