Advertisement
Advertisement
Table of Contents
Summary of Contents for Escape BAC V
- Page 1 BAC V Immersive Entertainment Controller Quick Start Guide...
- Page 2 Welcome From the entire team at Escape Room Techs, we’d like to express our deepest thanks for placing your trust in our BAC V controller for your next immersive entertainment project. We’re excited our products are about to bring smiles to guests at your facility! We’ve created this guide to help you get up and running...
- Page 3 Contacting Us The best way to reach us is via e-mail at escape@escaperoomtechs.com We respond to e-mail around the clock and unless we’re asleep or in the lab, you will likely receive an initial response within a few hours. You’re always welcome to send additional messages at any time asking for an update on your support request.
- Page 4 Getting to know your BAC The BAC V is a general purpose escape room controller, with 8 inputs, 6 outputs, and 2 relays. Power The BAC operates on 12-24V and requires a minimum of 1A of power supply capacity. We strongly recommend you choose 12V as your operating voltage, as it maximizes the potential compatibility with other props and products we sell.
- Page 5 To wire an output to the BAC V, connect the red/positive wire to the output, and connect the black/negative wire to GND (-). This configuration is called “high side drive” and is the default setting on your controller.
- Page 6 Relays In addition to 8 outputs that supply 12V power, the BAC includes two relays. These relays do not supply any power on their own – they are simply a computer controlled switch, which works by energizing a magnet which moves a switch contact from open to closed.
- Page 7 Setting up and configuring your BAC To get started with your controller: Install the provided terminal blocks. These terminal • blocks only insert one direction and should press snugly into the sockets provided on the top of the controller. Each terminal ships closed, so you will need to unscrew the screw on the top fully before you can insert a wire to make a connection.
- Page 8 Install BAM, our management software. You can • download the latest version from https://learn.escaperoomtechs.com/ Open BAM. If BAM does not open its main window • automatically, check our web site for troubleshooting advice. Find your controller in the list, then open its settings and •...
Need help?
Do you have a question about the BAC V and is the answer not in the manual?
Questions and answers