Advertisement
Antenna (HG2416P Shown)
(Shown Vertical Polarized)
10-24x5/8" Pan Hd.
Screw (4)
L-Bracket
(Down-Tilt Mounting Shown)
HGX-PMT04 - Large Metal
Tilt-and-Swivel Mounting
Bracket for Wall or Mast mounting
Optional Wall Mounting Bracket
(Sold Separately)
IP-00004 Rev. D – 12/04 Page 2/2
L-com Global Connectivity | 50 High St., West Mill, 3rd floor, Suite #30 | North Andover, MA 01845 | USA
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com Logo are registered marks.
2" U-Bolt
Clamp
Mast
1/4-20 Serrated Flange Nut (2)
Mounting Options
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
Toll Free Ordering and Technical Support: 1-800-343-1455
MOUNTING INSTRUCTIONS – HG2416P
Mast Mounting Kit (Supplied):
Attach L-Bracket to antenna back as shown using
(4) 10-24x5/8" pan head screws. Then secure to mast
using 2" U-bolt, clamp and (2) 1/4-20 serrated flange
nuts.
Antenna can be mounted in a tilted position from
0-60 degrees. See below for mounting options.
L-Bracket Mounting Options
0°
10°
Fixed
20°
Mounting
30°
40°
50°
60°
Fixed 0° Mounting
L-Bracket shown for down-tilt mounting. For up-tilt,
rotate bracket 180 degrees when attaching to antenna.
Vertical Polarized Mounting
Horizontal Polarized Mounting
Variable
Mounting
0°-60°
Advertisement
