Aztech in-Home DISPLAY PG&E Quick Start Setup Manual

Step 1: Power up your In-Home Display (IHD)

Plug the power adaptor into a 120 V AC wall outlet and press the middle button to turn on. Your IHD can also
operate your IHD on batteries so that you can take the display throughout your home and explore how the use
of different appliances impacts your energy use.

Step 2: Select Language for IHD text

 Select language using the up ▲button to scroll through options.
 Press the center √ button to select the desired language.
screens and menus. This selection does not translate messages sent by the utility via the Smart meter).

Step 3: Join your IHD to your meter

 Log into your PG&E My Energy account at http://www.pge.com/myenergy.
 On the bottom of the Overview page, select Home and Business Area Network.
 Register and Join your Aztech In‐Home Display.
During the pairing process,
 "Acquiring Signal" will be displayed and
 the light bar will glow red, sweeping back and forth.
When the meter connection is found,
 the information screens will become available for viewing and
the IHD will begin receiving information from the Smart meter.
If no connection is found within 5 minutes,

verify that the Acquiring Signal message is being displayed

(if you have not selected a language, repeat step 2) and

move the IHD closer to the meter
If no connection is found after moving closer to your meter,
 please contact your utility to confirm that your IHD has been registered
and that the utility is ready to join your IHD with the meter.
For further product or warranty assistance, please visit aztechIHD.com or email our service and support team at IHDsupport@aztechinc.com.
Copyright © 2014 by Aztech Associates, Inc. All rights reserved. No part of this guide may be reproduced, distributed, or transmitted in any form or by
any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of Aztech Associates Inc.
Quick Start Setup Guide – PG&E
Visit aztechIHD.com for product User and Configuration Manuals
Charge the IHD batteries overnight before first use.
Power on
(This selection only impacts labels on the information
.
Select
Scroll